Trim Issue

[Naso21]

I would like to run two samsung ssd 840 pro 256gig in raid 0. People have told me that I will have trim issues and not to do it. I thought you could do it with this MB. Any feedback would be appreciated! Thanks

[limitz]

Cool! Can we flash them within Advanced BIOS? or needs ROG Connect port?
Regards

[BenchZowner]

ROG Connect port.
There's a "certificate" thing from Asus that we need to "crack" in order to make the BIOS flashable via EZ-Flash BIOS Menu or within windows with Asus PC Probe whatevah.

[Naso21]

Thanks for the link, going to try it this weekend! Has anyone had any issues with the latest one?

[Desertum_0]

I have flashed the 12.0.0.1783 on my Maximus v formula.

Everything went ok, but onced i switched back to Raid, I could not longer see any sata devices connected to the Sata 6/Sata 3 ports from the z77 chipset.

Also, i could not boot any disk from my dvd-blu ray (Both under the z77 sata ports)

However, once I changed from raid to AHCI, the drives are back and i could boot from any device.

What can i do??

Also, Is someone using the 11.6.0.1030, 11.6.2.1002, 11.6.5.1006 version of iRST? It seems to run faster than the current 1.7.

Thanks a lot!

[limitz]

BenchZowner wrote:
ROG Connect port.
There's a "certificate" thing from Asus that we need to "crack" in order to make the BIOS flashable via EZ-Flash BIOS Menu or within windows with Asus PC Probe whatevah.

Gotcha'. Already done did it. I'm on the modded 1707. So far so good. 🙂

Desertum_0 wrote:
I have flashed the 12.0.0.1783 on my Maximus v formula.

Everything went ok, but onced i switched back to Raid, I could not longer see any sata devices connected to the Sata 6/Sata 3 ports from the z77 chipset.

Also, i could not boot any disk from my dvd-blu ray (Both under the z77 sata ports)

However, once I changed from raid to AHCI, the drives are back and i could boot from any device.

What can i do??

Also, Is someone using the 11.6.0.1030, 11.6.2.1002, 11.6.5.1006 version of iRST? It seems to run faster than the current 1.7.

Thanks a lot!

I have tested just about every 11.6, 11.7, 12.0 and 12.5 IRST driver I could get my digital paws on.
Some will definitely slow down the speed rate in my case: RAID0 xSSD. It will vary between 500 Gb's W/R and 1000 Gb's W/R for me.

What I have witnessed:
-see my thread on issue-