Sudden unexplaned error codes

[colin_pwns]

So yesterday i moved, very careful with my rig of course. Just re-set it up in my new place but it refused to boot. Error codes rotating betwen AE and 34. NO hardware changes prior to this. Cleared CMOS multiple times, re seated RAM, checked everything. Cant figure it out. anyone have any clues?

[fr35h]

if you are getting AE then the system is posting. Are you getting anything on screen at all?

[colin_pwns]

Nothing at all on the screens. about 80% of the time it stops on 34, other few times it gets to AE, but both times nothing is on the screens

[colin_pwns]

Hmm ok idiot moment, had monitors hooked up wrong, tho now it boots and i get a windows boot manager screen telling me that the boot failed because a required device is inaccessible...

[fr35h]

jump into your bios and check the sata config and make sure all the drives are there. If not maybe something wiggled loose

[Arne_Saknussemm]

Code 34 is displayed when you stop off in BIOS...a.s you have found if the board sits on that but you don't see anything you have a display related problem..

Just make sure all your drives that were there before the move are in again and connected to same ports.....have you set RAID mose in BIOS after clearing CMOS?