02-03-2013
09:07 AM
- last edited on
03-06-2024
09:20 PM
by
ROGBot
02-04-2013 05:32 AM
02-04-2013 06:35 AM
02-04-2013 06:41 AM
HiVizMan wrote:
Each motherboard will have its own settings that work. You can not transfer them across as a rule. Simply because how each board delivers power to the CPU is different. Suggest you start from scratch and work out what works best for your current system. Forget what was working before.
Just copied my answer to your other post here.
02-04-2013 06:38 AM
02-04-2013 06:42 AM
Chino wrote:
Can you post some screenshots of your Extreme Tweaker and DIGÍ+ Tabs?
02-04-2013 06:45 AM
02-04-2013 06:56 AM
02-04-2013 03:25 PM
02-18-2013 05:22 AM
Bluntwrapped wrote:
Ok so I took these screenshots earlier. If I leave offset voltage to AUTO, CPUZ reports 1.58v+ meaning I need -.100 ish offset for 1.44v. -.005 or -.010 as shown gives a BSOD. If I cant get this stable -.100 is going to be impossible..
If I set the voltage manually everything is stable as expected
4.8Ghz @ 1.368v LLC ultra high
5Ghz @ 1.44v LLC ultra high
I really want my offset voltages back 😞 this is driving me crazy..