cancel
Showing results for 
Search instead for 
Did you mean: 

Starting up first time...

RTS001
Level 7
Can you use the HDMI to start up for the first time. Cause I am not getting a signal period from the mother board. I have checked all connections. All the fans come on. H100i is on. But not getting anything.
Build in Progress

IN WIN D-Frame (Red Limited Edition)
Maximus VI Extreme
Intel 4770k
Corsair AX1200i
Corsair H100i (Maybe Lepa HDB240)
G.SKILL Trident X Series 16GB
Samsung 840 512GB
WD Black 2TB
Video Cards (TBD)
3,585 Views
4 REPLIES 4

Praz
Level 13
HDMI from the iGPU? If so yes the board should boot fine. What does the POST code display show.

RTS001
Level 7
I just figured it out... I always thought you started with the RED dimms for ram but apparently on the MVIE i switched to the two blacks and waala!
Build in Progress

IN WIN D-Frame (Red Limited Edition)
Maximus VI Extreme
Intel 4770k
Corsair AX1200i
Corsair H100i (Maybe Lepa HDB240)
G.SKILL Trident X Series 16GB
Samsung 840 512GB
WD Black 2TB
Video Cards (TBD)

Praz
Level 13
Good that you got it booting but the memory should work fine in the red slots. Have tried with only one stick in the first red slot from a UEFI clear, default settings?

Somewhat done. still waiting on graphics card...but at least its up and running~
Build in Progress

IN WIN D-Frame (Red Limited Edition)
Maximus VI Extreme
Intel 4770k
Corsair AX1200i
Corsair H100i (Maybe Lepa HDB240)
G.SKILL Trident X Series 16GB
Samsung 840 512GB
WD Black 2TB
Video Cards (TBD)