cancel
Showing results for 
Search instead for 
Did you mean: 

So Stumped... Windows 7 or 8.1 installation issues

stilmon
Level 7
This is my first custom system. I purchased the below equipment and cannot for the life of me get the system to install windows.
its setup Raid 1 (tried normal sata and no luck either) and everytime windows tries to load it gets the (BSOD) page error fault or on windows 8.1 just loads and stops. I have uefi off and cannot figure out for life of me what else to do.



ASUS RAMPAGE IV BLK ED. 2011

INTEL 0OX INTEL CORE I7 4930K

EVGA GTX780TI CLSD 2XB ACX 3GB

CORSAIR 16GB 2X8D3 2400C11 VGNPRO
CORSAIR 16GB 2X8D3 2400C11 VGNPRO

CORSAIR HYDRO H105I LIQUID COOLER
4,392 Views
7 REPLIES 7

Chino
Level 15

tried both

Chino
Level 15
I see that you're combining two kits of RAM. Have you tried removing one kit to see if the error stops? If not, please do so and report back.

stilmon
Level 7
I tested each ram individually and then operating system seems to load. when i introduce all 4 at once it has issue. maybe its the combination im doing? what slots should they be in ? i have 4 sticks and 8 possible slots.

Chino
Level 15
There is never a 100% guarantee two separate kits will get along together even if they are identical. If you had used XMP before to setup your RAM when having installed the two kits together, try doing it manually. That way you they have a better chance of them working together.

As for the recommended memory configuration, you should be using the DIMM A1,B1,C1 and D1 slots for optimal performance. In other words, the grey ones.

stilmon
Level 7
Seem to have resolved it. Looks like i had to specify the memory speed @ 2400 MHZ as auto detect wasnt working for some reason.


thanks for help!

HiVizMan
Level 40
Pleased you have it sorted.
To help us help you - please provide as much information about your system and the problem as possible.