ROG STRIX B350-F GAMING issues

[theprob]

Hello,

Anyone experienced the following with the mentioned board:

After 6/10 system starts my system don't see the LAN adapter or my mouse at all. I need to restart the system or replug my mouse to solve the issue. I've experienced the mouse connection issue within UEFI too. Furthermore I experiencing further annoying problems, such as random video signal loose (especially when I start a fan calibration within AISuite 3). After that, I can only revive my system with a hardreset.

I tried to reinstall windows/nvidia driver/chipset driver, etc. And of course, I have the latest BIOS version.

Now, I sent back the board to the vendor, because ASUS Support advised that. They will revise it. I hope soo, that they won't evalute that it's just a SW related issue...

[gaspar_lobo]

Equinox187 wrote:
Have you by any chance over clocked your CPU also? Just wondering as my 3000 ram will only run stable when the CPU is at stock settings, so if your CPU is over clocked perhaps try setting this back to stock and then see if the ram is stable at the 3200.

No, im running CPU at stock

DarkHoundOne wrote:
Is that by any chance the F4-3200C16D-8GVKB kit? I have the same kit and can't get past 3066 either.

Yes, it is indeed

[panzlock]

I doubt this was intentional. ASUS is notorious for omitting or mislabeling update information.

[HolyDiver]

With D.O.C.P. Standard I was able to run my 16Gb Kit DDR4, 3200 MHz, G.Skill Ripjaws V (F4-3200C16D-16GVKB) on 3200 and so far it looks stable. Just D.O.C.P mode was not stable for me, so in case try also D.O.C.P. Standard.

Also I use Ryzen 2400G as my APU.

[Equinox187]

A little disappointed in this new bios, in the early days i used to get my ram to run at 3000 with an OC of 3.8 or higher but that all ended after a certain update and ever since i never could get it stable, so was hoping this new bios would fix this but nope and while i can get the ram to run stable at 3000 with the CPU at stock, the second i OC the CPU to 3.8 i get crashes and i have to drop the ram back to 2866, so it yet again seems that i have to decide between 3000 ram or 3.8 cpu but not both

[Equinox187]

Again If you are having issues with getting your ram to run at the speed you want are you also OCing your CPU if so disable this and you might find it will now run the higher speed ram stably

[Nico23ru]

Equinox187 wrote:
Again If you are having issues with getting your ram to run at the speed you want are you also OCing your CPU if so disable this and you might find it will now run the higher speed ram stably

Im running CPU at stock
Ryzen 5 1600X

[Fredy_M]

Nico23ru wrote:
Im running CPU at stock
Ryzen 5 1600X

you could try to set docp profile not docp standard...my lpx 3000 is oc`d @3200 with docp profile but with docp standard it isn`t stable...

[CornFlakes]

Fredy M wrote:
you could try to set docp profile not docp standard...my lpx 3000 is oc`d @3200 with docp profile but with docp standard it isn`t stable...

Which settings are you using? Or did you just load the docp and set it to 3200MHz?

[Fredy_M]

CornFlakes wrote:
Which settings are you using? Or did you just load the docp and set it to 3200MHz?

yes, I just set it to docp and manually set the freq to 3200 Mhz, hit F10 and that`s it, everything else is on auto

[haze_1986]

In the latest bios update I could no longer get wake-on-lan to work anymore. Did anyone manage to get it working?