Rampage IV Formula Err. 34

[Duracell84]

Hi Guys!

I was 2 weeks away from home... done the normal things to save home - cut off power supply of PC and so on.

When I was coming back and turned on the power, my PC done nothing. So I changed the PSU and now the MB shows Err 34. I've pressed all possible Buttons at the MB but it still says Err 34. What could this be?

Greetings
Duracell84

[Arne_Saknussemm]

34 is the code it sits on in BIOS....do you have any display? Maybe try different GPU or look for some problem in display pipeline...

You have cleared CMOS?...Maybe remove all power again and remove battery for a few hours...and clear CMOS that way

[Duracell84]

Yes, I cleared everything.^^

I will try to cut off power and remove the battery over night. Send info's tomorrow. Thx for now.

[Duracell84]

I've checked all GPU connections and cleared CMOS like "Arne Saknussemm" wrote. Still the same Problem...

What else can I do?

Found a video which shows exactly my problem:
https://www.youtube.com/watch?v=-IFNqnbW6Ec

Greetings

[Arne_Saknussemm]

The guy in that video has ram in wrong slots etc.

Do you have any display? Monitor showing BIOS?

[Duracell84]

now my board isn`t even starting. just start, reset, bios 1 and the red "pipe" on the board is flashing.

Have had no display show last time.

Really need help here... 😢

[Arne_Saknussemm]

Have you tried the other BIOS chip?

Maybe strip down the system...even take board out onto box and try to boot with one stick of RAM only...

Tried different wall socket for plugging in PSU

24 pin 8pin and 4pin ATX power all connected?

[Duracell84]

Found the failure:

One of my Front-USB is broken, so that was why the lights on the board were flashing - there was all the time a electrical short. Why the Err. 34 was there, I still don't know. But System is running fine again.

Thx for your help!