Rampage IV Extreme Debug Code 34

[Rolord]

Hi, I got an error a few days ago and can´t fix it myself,

it says Debug Code 34 and the Boot Device LED is Red. So my PC doesn´t post and i tried everything i read on the internet like changing Sata Cables or one RAM Stick or take out cpu and build it back in. MemOK Didn't worked to.Only thing i can't do is a Outside Case build cause I got a water-cooling loop and it would be a big mess if i do this:D

Please tell me what Ideas you got, cause i don't know what to do anymore. My PC was running 1.5 Years without Problems and now it got this fault so i don't really thing its because of the RAM.

Thanks guys!!

[Arne_Saknussemm]

Do you have display when this happens?

34 is the code the board sits on in BIOS usually.

Have you changed anything prior to this happening? You say 1.5 years....all same hardware as now? Software?

Have you cleared CMOS?

Full system specs is always useful..:)

[Rolord]

Hi, thanks for answering!

I got my Screen Connected via HDMI but I got no Signal so i can´t go to BIOS Menu or anything.

I only connected one more fan a few weeks before it happened, and I downloaded a Software for Blurry ripping to save Blurays to my HDD, I don´t think it has anything to do with my problem, cause the rest is still normal, would maybe a Trojan or some Virus cause this failure? I got Kaspersky but you never know.

I have cleared CMOS, changed to other Bios, i tried Reset and MemOK! Don´t know what I could do more than this.

Something i forgot to say, I also got an error like 62 or 64 or something and i read its because of the Soundcard, so i disconnected it and my PC worked again, but when i switched it off and wanted to switch on again i got this 34 error since then.

So my system specs:

Rampage IV extreme
i7 4930k WC
2x R9 290x WC
g.skill trident 1866Mhz DDR3 32GB
Xonar Pheobus soundcard
AX 1200i PSU
Samsung SSD 256gb
2TB HDD

[Arne_Saknussemm]

OK well as I say...it sounds to me like the board is working and sitting in BIOS waiting for you but you have some problem in the display....maybe the cable is damaged monitor not working...you have other monitor or other cable...dvi or dp?