cancel
Showing results for 
Search instead for 
Did you mean: 

Rampage IV Extreme bios 1101 problem

jueho
Level 7
Why I was use 1101 bios to play battlefield 3 have this picture problem..
but I use 0703 bios not have this problem..
What can I do..
Thank You everyone
548 Views
35 REPLIES 35

DangerClose
Level 7
I too was encountering weird crashes with 1101. I went back to the 0006b bios.
*Asus Rampage IV Extreme - 3930K - 32GB Corsair Vengeance 1600 - 2x Corsair Force GT 120GB SSDs - WD VelociRaptor 600GB Steam drive - 3x 7970 Tri-Fire !! - Corsair AX1200 PSU - Thermaltake Level 10 GT case - H100 Cooler - Win7 x64 Ultimate :cool::cool::cool:

HiVizMan
Level 40
Did you watch the video in the link I posted? The BIOS is over when the flashing orange lights of the BIOS have stopped.

Not sure what else to say.
To help us help you - please provide as much information about your system and the problem as possible.

Thanks, I saw the video and read the instructions ... But I did not understand a thing, keep the motherboard connected to the current, or I can unplug the power?

HiVizMan
Level 40
You need to keep your motherboard connected to the PSU.

The PSU needs to be on.

The motherboard needs to be in stand by mode.

That means there is power on the board but not switched on.

All good? Please ask if you are not sure that is what we are here for. 🙂
To help us help you - please provide as much information about your system and the problem as possible.

Ok, so the current must pass on the motherboard .. (Start and Reset LEDs are lit)?

HiVizMan
Level 40
Yes that is correct.
To help us help you - please provide as much information about your system and the problem as possible.

Necrosan
Level 12
No problems with 1101 + my GTX 580s in SLI in BF3.
MB: ASUS Rampage IV Black Edition
CPU: Intel Xeon E5-2697 v2 (Cooled by Corsair H100i w/ Noctua NF-F12 fans)
RAM: 64GB G.SKILL RipjawsZ 1600 (10-10-10-30)
GPU: EVGA GeForce GTX Titan X Hybrid
TV Tuners: 2 * Hauppauge HVR-1800
Case: CoolerMaster Cosmos 2

In the bios you set GEN2 or GEN3 pci.express?

HiVizMan
Level 40
Could you do that please mate - would value the input.
To help us help you - please provide as much information about your system and the problem as possible.

HiViMan wrote:
Could you do that please mate - would value the input


I will flash back too 1005 and try it tonight. I will post back later with results.