Rampage Gene IV - error code AE

[Hot_Police]

Hi,

I'm using a Rampage Gene IV motherboard.
Bought a new Geforce N770 gfx Card.

If I start up the system with my Geforce 560gtx everything works fine. (Meaning nothing is broken)

The first time I installed the 770 my computer got stuck on boot code b2. So after lots of research and reading threads on this forum I assumed it was because of bios firmware that the mobo was not detecting the newer gfx card. So I updated to the latest bios version (4802) doing a bios flash. Now if I boot up the system it gets stuck on code AE. It hangs there for a while then seems to reset and kind of just loops hanging at code AE for the majority of the time.

Did some more reading and decided to try a cmos clear. Then the system gets stuck on code 34. Did a bios flash again to latest version and now it's back to code AE.

I haven't had any output to my monitor since the first time I've installed the 770. Have tested 3 different screens including the 1 I'm using atm on my 2nd computer.

I've also tested the 770 in my friends pc and it worked.

I'm out of ideas, any help on this would be much appreciated.

[HiVizMan]

Please swap out your graphic card to a different PCIe lane and see if the card is working. Do you have all the power connectors fitted to the new VGA?

AE is not a problem and simply telling you that your system is in OS.

[Hot_Police]

I got it working...

Somehow in the process of testing screen, gfx card and motherboard my screen broke.
It was looping and stalling on AE because after I did the BIOS flash it wiped my previous settings so my hard drive wasn't set to IDE mode making windows blue screen. Obviously I couldn't see anything because the screen broke after I switched it back from my other pc (it switches on but doesn't get any signal).

I always have worst luck with these things.
Thanks for the response though, appreciate it!

[HiVizMan]

Your hard drive is set to IDE?

Ah right the defaults are AHCI

AE means handed over to AHCI or OS. All good mate enjoy your system.

[Ambush]

You seemed to have fixed your problem.

I'm also a GENE VI owner and I can tell you a new bios update was released 1-17-14. Check it out.

EDIT: Sorry didn't see the Rampage, was thinking Maximus.