R4BE with Gskill Trident X 4x4 16Gb 2400mhz experience

[Concerve]

my friend have R4BE , 4930k 16Gb (4x4Gb) Gskill Trident x 2400mhz cl10 memory
this memory only stable 1800mhz sometimes blue screen

i speak my friend and new setup

memory type dont XMP , use it Manual

DRAM frequency 2400mhz
Timings 11-13-13-31 2T
Memory voltage 1.65v
Cpu vccsa voltage 1.20v
Cpu vtt voltage 1.10v

Digi vrm control
Cpu loadline calibration medium
Cpu current capability %130
Vccsa loadline calibration regular
Vccsa current capabilty %130
Dram current capability %120
Dram power phase control optimized

now working 4x4 quad channel 2400mhz great and Aida64 test stable
this settings not bad?

[Nate152]

Hello Concerve,

You got it working with a trident x kit? Trident x is geared more towards the maximus boards. Ripjaws-z is the kit you should have gone with but if you got it working with trident x, I give you a hi-5. Looks like you had to relax the timings a bit.

Settings look good to me.

[darkage]

i have used 2x2gb x2kits and 4x4gb kits with no problem at all, i had tridentx 2400cl10 that worked just fine at stock timings, try to set things as per g.skill settings, dont need to mess with anything else

[HiVizMan]

Those settings are not bad at all. I have seen that some folks need to use the following to get their memory rock solid

Set VTT to 1.2
Cpu current capability %140