cancel
Showing results for 
Search instead for 
Did you mean: 

Q Code 55 Error

Ccutsa7989
Level 7
Hey, i just set up my new system last night and ran into a couple of issues.

Upon completing the build and starting it up it began to give me error code 55, which points to being a ram issue.
I am currently running 16G (4 x 4g) Corsair Vengeance 1600, and i could not get it to post at all. I got it to finally work after testing each stick and showing that they are all working, but it was only working with one stick at a time. I went into bios and set it to use XMP and profile 1, which changed it from 1333 to 1600 on the profile. I was able to get two sticks to run in it after making those changes.

Right now i have a Stick in A1 and a stick in A2, so they are running single channel, but i cannot get it to post with all 4 sticks still. When i get home ill see if i can get it running while in A1 and B1 for dual channel. What else should i try to get this ram to work. I am somewhat new at building systems.
373 Views
15 REPLIES 15

Ccutsa7989
Level 7
Still doing the same thing. any of the ram sticks work., but they only work in A1 and A2 as of right now.

HiVizMan
Level 40
RMA the board please.
To help us help you - please provide as much information about your system and the problem as possible.

Ccutsa7989
Level 7
Thanks for the help. Should i get it rma'd through newegg where i bought it or from the asus website?

http://rog.asus.com/forum/showthread.php?4805-ASUS-US-amp-Canada-RMA-Guide&country=&status=

Here you are mate.
To help us help you - please provide as much information about your system and the problem as possible.

HiVizMan
Level 40
It depends how long you have had the board. There is a stiky post about how to RMA a board in the US. I think it is on both the Rampage section and the Maximus section.
To help us help you - please provide as much information about your system and the problem as possible.

Ccutsa7989
Level 7
Thanks for everything.