01-03-2025 07:53 AM
Hi there,
I would like to equip the WRX90E with at least 4 Blackmagic cards (Pcie Gen 3), unfortunatly only the last three slots (5,6,7) are working, I noticed from the manual that these slots are connected via a redriver. I tried also to set the none working slots to Gen3 via the bios, but without any luck, a BM card put into the first 4 slots does not appear at all in the system. The two PCI_8P_PWR are connected to the psu (1.3kW). I should also mention a GPU put in slot 1 is working fine.
What is the problem with pcie slot 1 to 4 and is there any solution?
Help is much appreciated.