cancel
Showing results for 
Search instead for 
Did you mean: 

PC Won't boot up after loading optimised default.

Aakash
Level 8
Hi! Friend I may completely sound dumb but after getting each component back after month of rma i forgot some stuff about over clocking.
So story is when i assembled desktop i clicked on way optimization after which i ran rog real bench, after a moment i realized that cpu multiplier or ratio whatever it is called is set to 42. Then it hit me that 4 way optimisation is crappy way of oc. Then i jumped to bios and clicked on load optimised default and pressed save and restart. But pc rebooted three times and after which all fan kept running but no screen. Then i opened the case to look for the problem and i saw that boot device led is glowing. Then i re seated the gpu, ram and hdd but nothing helped same thing happened again and again. Then i replaced my gpu with another and voila pc booted up.
After which i again installed first gpu and every thing is running fine.
SO my question is that can you plz tell me the reason of that problem, asking out of curiosity.

maximus 6 hero (Replaced 3 Times)
8gb kingston hyper x blu (replaced 1 time)
i5 4670k (replaced 1 time)
seasonic eco 600w(replaced 1 time)
cooler master hyper evo 212x
wd blue cavair 1 tb
case corsair carbide 400 R
hd 6670 (replaced 3 time)
3,452 Views
2 REPLIES 2

DSD27
Level 7
IDK, maybe something related to fast boot/hardware boot?
Everytime I make changes on those two options the pc reboots 2 or 3 times.

DSD27 wrote:
IDK, maybe something related to fast boot/hardware boot?
Everytime I make changes on those two options the pc reboots 2 or 3 times.

Sorry for late reply and problem is with graphic card. PC Won't bootup until i put another graphic card and again use the faulty one.