OC Panel/ FAN bios/FanXert ranges

[Suspector]

Can anybody tell me why the Level Up button on my OC panel isn't working for me ?

I'm using the OC Panel in normal mode. In AI Suit and BIOS I'm able to level up (except 4.6, which ends in blue screen :mad: -> may need some manual adjustemnts, I think)
However, the OC Panel button seems to do nothing, except posting level up on panel, but AI suit still show the default level up (4.2)

Next, do anybody know, how to adjust the fan's control properly by using a water cooling.
My problem is the range in bios and fanXpert. So, using BIOS user mode, is just a liniar setup, where I would need minimum 3 points (like FanXpert provids).
Changing on FanXpert will not solve the problem. Instead it increase the problems, because it's using some mystic Temperatur calculation (it can't be the real CPU temperatur i.e. water 31°C and AI show 84°C @ prime95 and ~40°C at idle) for control,which is not the water temperatur.
Currently, I using the following temporary solution:
WC fan 1 : controlled by OPT_FAN1 + OPT_TEMP1 (water temperature sensor) 25°C-70°C
WC fan 2: FanXpert CH2 ( 34%@40°C , 50%@60°C , 100%@75°C )

But this isn't ideal. Is it possible to assign OPT_TEMP1 to CH2 fan (in FanXpert) , instead of using the mystic temperature calculation ?
Are there any plans adding a 3rd control point to BIOS user mode for the OPT FAN's ?

At least, if it's possible to have a temperatur slide show on OC panel (i.e. CPU, MB, OPT1 etc) ?

G,
Sus


My system:
M6E
i7 4770k
16GB-Kit Corsair Vengeance black PC3-12800U CL9-9-9-24 (DDR3-1600)
evga GTX Titan superclocked
CPU + GFX water cooled

[HiVizMan]

Hello I can only really comment on the first question.

I would suggest that if you are making adjustments in BIOS that is preventing AISuite is not doing as it should??

If you are at defaults in BIOS does the AIsuite do the level up thing correctly?

[Suspector]

AI suit works, if I change the level in AI suit, the system restarts with new level, then it performs 4 way opt and system runs on the new level.
I assume this is normal.
The OC panel level up button isn't working (or better AI suit do not show any changes and stuck on Level 1).
I already loaded defaults at build of new system.
So, I must not use level up in bios to be able to use OC Panel Level up ?

[HiVizMan]

I think you should test that yourself, leave bios on default and use the OC panel and see how it goes. Then you will know for sure. It will not harm you system.

Yes AISuite works that way and it is correct.

[Suspector]

ok, tried that (loaded defaults), but same as before. After load of defaults and restart, the bios has automaticaly select level 1 4.2G and OC panel level up button don't work.
Where, I can level up to 4.4G in bios without problems (4.6 also, but not stable yet).
I'm also a bit confused about the OC panel never shows level 1, even when active.

[HiVizMan]

OK I will have to pull out my board and do some testing for you. Will not be today or even tomorrow but as soon as I have a couple of hours I will do the testing.

[Suspector]

Anybody else knowing why the Level Up button isn't working on OC panel when in normal mode ?
(in extreme I'm able to change the voltages etc. However, the level up button never works on panel, where AI suit do well)

[HiVizMan]

Still not had time to test for you my friend. I am sorry I will make it a priority.