Help
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 

New Rampage IV extreme. No beeps on startup...

luci89
Level 7

‎02-21-2014 04:20 AM - last edited on ‎03-05-2024 11:39 PM by Community Admin

Hi guys, yesterday I turned on for the first time my new Asus Rampage IV extreme. Everything is ok and the system starts normally. The display status on the board is AA but I have read that is ok. The only strange thing is that there aren't beeps on startup. I think that in a normal condition, it should be emit 1 short beep right? I haven't beeps but everything works fine... Why?
Labels:
0 Kudos
3,476 Views
4 REPLIES 4

SysLam
Level 7

‎02-21-2014 05:08 AM

use internal System Panel connector to connect external chassis speaker - see Manual page 2-41
Case CoolerMaster Cosmos II PSU Thermaltake TP-1500M MB Asus Rampage V Extreme [WaterBlock] CPU Intel i7 5960X [WaterBlock] GPU 2x Saphire R9 295X2 8GB OC CrossFireX [WaterBlock] RAM Kingston HyperX Predator 3000 4x4GB Pump Koolance PMP-450S [24V] SSD OCZ Z-Drive R4 RM88 800 GB SB Creative SoundBlaster ZxR BD+DVD Asus BW-16D1HT Monitor NEC MultiSync PA271W OS MS Windows 8.1 Pro x64
0 Kudos

luci89
Level 7

‎02-21-2014 05:18 AM

The external speaker is connected... I will check if it is in the correct position
0 Kudos

SysLam
Level 7
In response to luci89

‎02-21-2014 05:21 AM

luci89 wrote:
The external speaker is connected... I will check if it is in the correct position
check speaker on another board, one beep has occur on startup
Case CoolerMaster Cosmos II PSU Thermaltake TP-1500M MB Asus Rampage V Extreme [WaterBlock] CPU Intel i7 5960X [WaterBlock] GPU 2x Saphire R9 295X2 8GB OC CrossFireX [WaterBlock] RAM Kingston HyperX Predator 3000 4x4GB Pump Koolance PMP-450S [24V] SSD OCZ Z-Drive R4 RM88 800 GB SB Creative SoundBlaster ZxR BD+DVD Asus BW-16D1HT Monitor NEC MultiSync PA271W OS MS Windows 8.1 Pro x64
0 Kudos

HiVizMan
Level 40

‎02-24-2014 08:20 AM

If your system is working just fine, I am not sure why you need a single beep to tell you your system is working just fine...
To help us help you - please provide as much information about your system and the problem as possible.
0 Kudos