cancel
Showing results for 
Search instead for 
Did you mean: 

New pc build- q-code ae. No post.

Hatchling
Level 7
First things first.

SPECS:

1 x Thermaltake Level 10 GT (VN10001W2N) Black SECC / Plastic ATX Full Tower Computer Case with Four Fans-1x 200mm Colorshift

1 x ASUS Rampage IV Black Edition LGA 2011 Intel X79 SATA 6Gb/s USB 3.0 Extended ATX Intel Motherboard

1 X Thermaltake Toughpower Grand TPG-1200M 1200W ATX 12V v2.3 & EPS 12V v2.92 SLI Certified CrossFire Certified 80 PLUS GOLD Certified Modular Active PFC Power Supply

1 x G.SKILL Ripjaws Z Series 64GB (8 x 8GB) 240-Pin DDR3 SDRAM DDR3 2400 (PC3 19200) Desktop Memory Model

1 x WD BLACK SERIES WD4003FZEX 4TB 7200 RPM 64MB Cache SATA 6.0Gb/s 3.5" Internal Hard Drive

1 x Intel Core i7-4960X Ivy Bridge-E 3.6GHz (Turbo 4GHz) LGA 2011 130W 6-Core Desktop Processor BX80633i74960X

1 x Cooler Master V8 GTS - High Performance CPU Cooler with Horizontal Vapor Chamber and 8 Heatpipes

1 x BenQ XL2411Z Black 24" 144HZ 1ms (GTG) HDMI Widescreen LED Backlight LCD 3D Monitor (En route to house via Snail mail.)

2 x Sapphire Tri-X R9 290X 4GB GDDR5 OC



Current Issue is My pc is Hung at Q-CODE AE. sometimes 34. RIght now i am using Bios 1, and one of my PCI-e leds are lit on my MB.

I have researched about 65% of this forum for Q-code AE and i am highly confused on which to start on.

What i have done so far.

I have Reseated all of my Ram Chips, and removed one of my Video cards I am currently trying to setup using my 42 led tv because i do not have my monitor yet and i am getting no feed from my video card to my TV. I have it set on the right Hdmi Port Verified this against my laptops I/O hdmi.

Any direction would help. Been reading my MB books and nothing Swapped my Cards.
2,203 Views
1 REPLY 1

Arne_Saknussemm
Level 40
34 means the board is sitting at BIOS and waiting for input from you which makes me wonder if you have some display issue. Connecting to TVs seems to throw lots of issues up.

Is your RAM one single 64GB kit? In any case I would remove all but one dimm for now for troubleshooting.

Use one GPU too...in fact disconnect anything not vital to starting up...peripherals etc.

The PCIe lane light should be on if the switch is "on" and the lane populated.