cancel
Showing results for 
Search instead for 
Did you mean: 

NEW : MAXIMUS-VI-EXTREME-ASUS-1203 Bios

jh30uk
Level 11
8,865 Views
12 REPLIES 12

Dave6479
Level 7
Thanks for the tip, downloaded and flashed.
I7 4770K @ 4.6GHz, Custom Water Loop
Asus Maximus VI Extreme-Z87, BIOS 1603
EVGA GTX 780ti SLI x3, Vulkan 356.43 Skyn3t VBIOS
Corsair Vengeance Pro @ 1866MHz, 16GB
Samsung 850 250GB SSD (OS)
Samsung 840 120GB SSD
Corsair GT 120 SSD
Corsair Performance Pro 128 SSD
OCZ Vertex4 120 SSD
PSU EVGA SuperNova 1300W
ASUS Swift PG278Q 144Hz G-Sync
Oculus Rift DK2 + Leap Motion
Windows 10 64-Bit Insider Build 14271

Dave6479 wrote:
Thanks for the tip, downloaded and flashed.


What's BIOS 1203 like?? did it fix any issues for you, if so what? are your 2nds GTX780 running perfectly fine in the black B2 slot with this BIOS?

pennyboy wrote:
What's BIOS 1203 like?? did it fix any issues for you, if so what? are your 2nds GTX780 running perfectly fine in the black B2 slot with this BIOS?


So far I've only got the one complaint and that's my USB3 always seems to be running slower than what I'd expect but I'm not sure if that's a BIOS issue or software related as it's always done it. Everything else works fine and even got a 6 point increase in Realbench v2.0 pushing it to 85121. As for the B2 issue I've never suffered from it regardless of what BIOS I've had on, and I've tried them all.
I7 4770K @ 4.6GHz, Custom Water Loop
Asus Maximus VI Extreme-Z87, BIOS 1603
EVGA GTX 780ti SLI x3, Vulkan 356.43 Skyn3t VBIOS
Corsair Vengeance Pro @ 1866MHz, 16GB
Samsung 850 250GB SSD (OS)
Samsung 840 120GB SSD
Corsair GT 120 SSD
Corsair Performance Pro 128 SSD
OCZ Vertex4 120 SSD
PSU EVGA SuperNova 1300W
ASUS Swift PG278Q 144Hz G-Sync
Oculus Rift DK2 + Leap Motion
Windows 10 64-Bit Insider Build 14271

Dave6479 wrote:
So far I've only got the one complaint and that's my USB3 always seems to be running slower than what I'd expect but I'm not sure if that's a BIOS issue or software related as it's always done it. Everything else works fine and even got a 6 point increase in Realbench v2.0 pushing it to 85121. As for the B2 issue I've never suffered from it regardless of what BIOS I've had on, and I've tried them all.


Thanks for coming back to me. Kinda tempted to flash my BIOS and try my 2nd GTX in b2!!

desolator4u
Level 7
I too am curious as to what changes this BIOS revision has made. There are never any official documentation on this stuff, huh?
8700K / Noctua U12S / Maximus X Hero / 2x8GB Corsair Vengeance 3200MHz / EVGA GTX 1080 Ti / Seasonic Prime 650W / 4 x 1TB SSD / 970 Pro 512GB M.2 / Game Zero Headset / K95 Platinum / Logitech G502 / Win 10 x64/ ViewSonic XG2701 1080p 144Hz

desolator4u wrote:
I too am curious as to what changes this BIOS revision has made. There are never any official documentation on this stuff, huh?


This also a concern of mine as 1102 trashed all my OC settings. On 0804 I was quite happy with my OC profiles:

1. Had 45 multiplier / 45 cache ratio setting at 1.275 VID and VCore (adaptive) reaching 1.328 max w/ max core at 74C under RoG Bench.
2. Had 46 multiplier / 46 cache ratio setting at 1.375 VID and VCore (adaptive) reaching 1.408 max w/ max core at 74C under RoG Bench.

3. I had a wireless issue and Asus TS required that I upgrade to 1102.
4. Spent 2.5 hours copying and reentering all my BIOS settings after flashing
5. None of my OC profiles worked anymore, all were unstable .... started redoing everything.

7. Now 45 multiplier / 45 cache ratio setting requires 1.32 VID and VCore (adaptive) reaching 1.44 max w/ max core at 75C under RoG Bench.
8. Now 46 multiplier / 46 cache ratio setting requires 1.39 VID and VCore (adaptive) exceeds 1.5 max w/ max core at 81C under RoG Bench when I shut down.
9. Now 46 multiplier / 43 cache ratio setting requires 1.38 VID and VCore (adaptive) reaches 1.28 max w/ max core at 75C under RoG Bench when I shut down.

10. OC Profiles load only sporadically ..... some days they do, some days they don't. Once you load profile, system freezes where it be one of the above or "stock".

As there were two BIOSs between 0804 and 1102, I gotta wonder what the problem was and why they were withdrawn. After the damage done by 1102, I am very hesitant to go to 1203.

Other settings above are on XMP (1.67 volts on Auto) ....everything else default.

Left messages in several other M6F and Z87 OC threads but no answers since XMas.

EDIT:

1. In case it wasn't obvious from the sig, should note that I have the M6F not M6E.
2. Should have mentioned that 45/42 works just fine but 46/43 w/ 1102 BIOS gets a BSOD w/ STOP Error code of 0x00000101 about 2-3 seconds into Intel XTU which is typically associated with:

a) BIOS bug
b) a driver whose activity is causing the target processor to lock up
c) a hardware defect

As the only thing that's changed is the BIOS, I'm going with a)

3. Similar posts by other Asus 1203 users on OCN
October 26 Build
MoBo:Max VI Formula
RAM:16GB Mushkin DDR3-2400 10-12-12-28
GFX:2x Asus GTX780 DCII
HD: 2x Seagate 2TB Hybrid SSHD
SSD:2x Samsung 840 Pro 256GB
PSU:Seasonic X-1250
Case:Phanteks Enthoo Primo
OS:Win 7 Pro-64
Monitor:Asus VG248QE Black 23" 144 Hz
Optical:Asus BR Burner
KB: Logitech G19s
Mouse:RoG GX950
Fan Con.: Six Eyes
Cooling:420+280 Alphacool Rads, 35x2 Pump, EK CPU/ GPU Blocks, Acrylic Tubes w/ BP Fit

Hopper64
Level 16
Works fine for me. Picked up a couple of points in Valley bench.
MZ790AE Bios 1703, GSkill F5-8400J4052G24GX2-TR5S, 14900KS, EKWB D5 TBE 300, Seasonic Prime TX-1600 ATX 3.0, Asus Strix 4090 w/ HK block, Phanteks Enthoo Elite, Asus Claymore 2, Asus Gladius 3, Asus XG349C, Crucial T705, Windows 11 Pro

Hopper64 wrote:
Works fine for me. Picked up a couple of points in Valley bench.


Good to hear Hopper64. Sounds like this BIOS would be a good one to try but not sure if I am up for risking it?? hahaha

Works good but my USB 3.0 (LG phone charger) will lock up the system and seems that my system is rebooting at night all buy it's self.

Log Name: System
Source: Microsoft-Windows-Kernel-Power
Date: 1/7/2014 1:36:44 AM
Event ID: 41
Task Category: (63)
Level: Critical
Keywords: (2)
User: SYSTEM
Computer: Upright
Description:
The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.
Event Xml:



41
3
1
63
0
0x8000000000000002

5511


System
Upright



292
0x0
0xffffe0000113e028
0xbf800000
0x124
0
0
0

Corsair 200R
Intel i5 4670k
Corsair H75
Maximus Hero
8GB G.Skill RipJaws (1600Mhz)
EVGA GTX 760 SC
Seagate 240GB SSD
WD 750GB Storage Drive
EVGA NEX 750 Gold PSU
Windows 7 64bit