New Maximus hero Bios 1301

[Retired]

As you can see :
http://www.asus.com/Motherboards/MAXIMUS_VI_HERO/#support

MAXIMUS VI HERO BIOS 1301
Improve system stability.
update 2014.01.14

[Shayne]

Anyone else having clock problems with the 1301 bios? Installed and reset and set up overclock again, raid etc. Booted into windows and my clocks where steady at 4500 and would not step down. Rebooted and reset to defaults a couple of time and rebooted. Just set raid so I could get into windows and they stepped down at stock. Reclocked and booted back in and they step down again to 800. That was last night this mourning I booted up and the clocks where stuck at 4500 again. Rebooted and they stepped down. Have never had this problem to date with this board and have installed all bios revisions looking for my USB 3 FIX! Which appears will never come. This USB 3 issue is a dam disgrace for Asus.

Regards

[desolator4u]

mysticode wrote:
Change log please Asus. We paid enough for the motherboard, a text file shouldn't be too hard to deliver to those who want it.

Thanks.

This.

[cnick6]

mysticode wrote:
Change log please Asus. We paid enough for the motherboard, a text file shouldn't be too hard to deliver to those who want it.

They seem to love their "Stability Fixes" jargon. Which is fine every now and then but when they put out 3 or 4 BIOS revisions in a span of a couple of months, I think we deserve more than that.

They're probably just updating the NSA's IP address for data collection. 😄

[Loiskostas]

What exactly is your USB 3.0 problem?

[Shayne]

Loiskostas wrote:
What exactly is your USB 3.0 problem?

Lexar card reader usb 3.0 not recognized, not powered, in any usb 3 port, works in 2.0 ports. Slow transfers to netstar usb 3.0 drive enclose have same speed with usb 2 on my office machine as I do with this one. Windows 8.1

Regards

[ewind]

no problems with clock speeds. at all.

[Shayne]

ewind wrote:
no problems with clock speeds. at all.

A number of resets and reclocks and mine has kicked in to. No clock problem now. You definitely need to set up setting after each bios update we should be getting good at it. The VT setting I always forget until I want to run a virtual machine in virtual box.

Regards

[Ominous_Penguin]

Anyone who had microphone gain/preamp issues report any change?

[Sherbat]

Flashed my Hero to 1301, set my bios options again, system stability improved I guess. I keep hoping the minimum fanspeed for the chassis fans gets sane values, 60% is just too much. I'll keep hoping.
Haven't perceived anything different compared to 1102 yet. I did extract the 'file list' of both 1102 and 1301, and compared them. I uploaded a sample, not too sure what I am looking at to be honest, but I guess the files with a changed size are different.


I do not have and haven't had any problems with clockspeed, I don't have any USB 3.0 disks nor do I use a microphone, so I can't comment on that.

[Venus222]

Do we have to setup RAM Memory and CPU Overclocking all over again, every time we flash a new BIOS?

I am newbie to Overclocking environment.