Need Help adjusting H110's pump speed

[PrimexDrn]

Hi , I wanted to make the H110's pump run at max speed all the time so I went into the BIOS of my Maximus VI Extreme and I got a bit confused , I never had the need to configure 3 pin fans before so I am in need of help 🙂 thnx for any replies

Edit: I forgot to mention that the H110's pump is pluged into the CPU FAN port

[PrimexDrn]

HiVizMan wrote:
You have a good CPU it seems. Nice rig you have put together there.

Thanks man 🙂 I actually thought everything would die on me when i turned it on the first time 🙂 it turns out I made a good rig after all 😄 anyways I am proud to have a rog magnet on my case 🙂

[COLDSTATIC]

incase anyone else reads this some of the other astek all in one water coolers require this.

plug water pump prompt into cpu fan header.
in bios set cpu fan to manual
set min to 70 or 60 I cant remember max degrees and 100% at speed
set max to 70 or whatever you set in the step above and set speed to 100%

that makes the pump run at full speed all the time while the other software can control the fans. fyi I run the kraken x60 but all those all in one water coolers are from astek.