cancel
Showing results for 
Search instead for 
Did you mean: 

Memory Setup Guide For Maximus VI Motherboards

Chino
Level 15
Memory Setup Guide For Maximus VI Motherboards


Maybe you’re putting together your first build but and you have no idea how to setup your RAM. Or perhaps you just made a major memory upgrade but you’re not experiencing any boost in performance whatsoever. Your RAM probably isn’t running at its full speed. So don’t start pulling your hair out! We’ll guide you step by step to configure them in no time!


So, what do you need to setup your RAM?
First, you’ll need a Maximus VI series motherboard, of course. For this guide, we’ll be using our Maximus VI Hero motherboard to illustrate the whole setup process. But the steps are universal for the other motherboards in the series as well!

28811



And, last but not least, you’ll need a kit of RAM. We’ll be using our favorite TridentX 2400MHz 8GB kit from our friends at G.Skill.

28812



Which slots should you use?
The appropriate slots to use depend on how many sticks of RAM you’re going to put in your system. We have listed the possible combinations and the optimal slots that you should be using.

28896



How many methods are there to setup your RAM?
The first method consists in using Intel's X.M.P. profile which automatically inputs the frequency, timings and voltage. On the other hand, the second methods involves you manually navigating to different parts of the BIOS and inputting them yourself.

In some cases, you might run into compatibility issues between the CPU and the X.M.P. profiles. As a result, you will experience the lack of stabilty when trying to use your system. So we'll be covering both methods in this simple guide.



Method 1. Using X.M.P. Profile

Step 1. Hit the Del key as soon as you see the Asus logo to enter the BIOS. The option that interests us most is the Target DRAM Speed. As you can see, it’s running at its default 1333MHz frequency. Time to take these babies to 2400MHz!

[/HR]
28827



Step 2. Navigate to the Ai Overclock Tuner and change it to XMP.

[/HR]
28828



Step 3. Most, if not all, high performance memory kits like our TridentX 2400MHz kit will have more than one profile. In this situation we choose the one that matches the advertised frequency.

[/HR]
28829



Step 4. Press F10 and a window will appear with a summary of all the changes that the XMP profile has changed. Click Yes to save and exit.

[/HR]
28830




Method 2. Manual Setup

Step 1. Start by setting Ai Overclock Tuner to the Manual.

[/HR]
28832



Step 2. Scroll down to find the DRAM Frequency option. Choose the advertised frequency that your memory kit is specified to run at.

[/HR]
28833



Step 3. Scroll down even farther and click DRAM Timing Control. The fun is about to start.

[/HR]
28834



Step 4. In order to configure your RAM properly, you need to input the the frequency the RAM was tested to run at, the correct primary timings and the voltage it needs to run properly. You can find the timings and voltage for your specific kit on the sticker that all manufacturers put on their sticks. Here you can see an example of the timings on our G.Skill TridentX 2400MHz stick.

[/HR]
28836


Here’s a quick crash course on memory timings. The primary timings consist of 4 numbers in this order: CL (CAS Latency), tRCD (RAS to CAS Delay), tRP (RAS Precharge) and tRAS (Active to Precharge Delay).

Now, let’s deduce the timings for our specific kit of TridentX RAM.
CL – 10, tRCD – 12, tRP – 12, tRAS – 31


But what if you've already finished your build and you don't want to pop off the case cover to look at the sticker? No problem. First you need to situate yourself in the Boot tab then press the right arrow to reveal the Tools tab. Now, choose the Asus SPD Information option.

29158


As you can see, all the X.M.P. profiles that are available for your RAM will be listed here. You can see the frequency of each profile, the voltage to run at this frequency and the primary timings that we will be changing further on.


Step 5. What we will do no is type each timing into the corresponding section. Hit ESC when you’re done to return to the Extreme Tweaker section.

[/HR]
28837



Step 6. Navigate down to the DRAM Voltage option and input the voltage that was on the sticker.

[/HR]
28838



Step 7. Press F10 and a window will appear with a summary of all the changes that we’ve made. Make sure to recheck every option that you’ve changed and make sure it matches your RAM’s specifications. Click Yes to save and exit.

[/HR]
28839
176,500 Views
60 REPLIES 60

Outstanding contribution Chino, thank you.
i7-4790K, Z97-WS, EVGA GTX 780Ti S.C., 16GB G.Skill Trident-X 1866MHz CL8, CM Nepton 140XL, EVGA SuperNova 1000 G2, Samsung 840 EVO 500GB SSD, WD Caviar Black 2TB, Win 8.1(x64), Asus PB-278Q (2560x1440p), Phanteks Enthoo Pro. Tripp-Lite LC1200 AVR. Build Images.

Bored & looking for the next project ... 🙂

Hi, i have exactly the same hard that you´re showing in the example, Mother and RAM.
is there any chance that using the 1 method somethings goes wrong?

I wanted to increase the frequency of the ram. I did it using this guide, the 1 method. Is this overclocking? Because i don´t want to do this.
I hope somebody can answer to me. Thanks!

MasterYoda
Level 7
it was easy and fast, thank you! 🙂
i was thinking that is different settings for other RAM, did not saw that can be automatic setup.

Hi,

I used the above guide method one and managed to boot my PC, but when I go into the AI suite it is still running at 1333 MHz and ROG CPUZ says its 667 still.

My PC (relevant):

4670k
Asus impact VI
HyperX Beast 2400MHz
SS Strider 750W Silver

Did I miss anything please?

Thanks,
John

kyufaker wrote:
Hi,

I used the above guide method one and managed to boot my PC, but when I go into the AI suite it is still running at 1333 MHz and ROG CPUZ says its 667 still.

My PC (relevant):

4670k
Asus impact VI
HyperX Beast 2400MHz
SS Strider 750W Silver

Did I miss anything please?

Thanks,
John


Ahh missed a pretty key item, after I set up the RAM, the PC would not post. It keeps restarting itself and I had to press the MemOk! button at the back to keep it going. Then it would just set it up as 1333MHz, quite peeved at the fact that I cannot run this at the RAM quoted speed...

Thanks

kyufaker
Level 8
Managed to get it going on XMP #2 2133, but not the top speed 😞

HiVizMan
Level 40
That is sadly to do with your CPU IMC I fear.
To help us help you - please provide as much information about your system and the problem as possible.

HiVizMan wrote:
That is sadly to do with your CPU IMC I fear.


Hi Mate,

Could you please elaborate a bit more?

Thanks