MemOK dont save settings

[Runaway_11]

HI, my frist time posting because english isn't my first lenguage.
I have a little problem with memOK. Just upgraded my ram to kingston hyperX fury (2x8 1866mhz) - not dual channel kit, just 2 sticks with same specs-.
This are the specs (plug and play memory, so it boot at 1866mhz default)

the problem are timmings because "auto" uses 11-11-11-30 and command rate -2T
using memOK i get the original 10-11-10-30-1T


but after saving changes with F10...


so, any ideas what im doing wrong?
thx for any help and sorry for my english

[Nate152]

Hi Runaway_11

You can set the timings manually, enter the original timings in with command rate 1, manually set the Dram frequency and Dram voltage too.

F10 and Enter to save and exit.