Maxiumus v gene manual cpu voltage

[TIGGER]

I set my cpu core voltage at 1.25v for 4ghz, but I noticed in core temp it is going up to 1.34v why? Is there something i need to change.

Can someone give me some manual settings for the voltages, as i noticed the pll voltage was on auto at 1.8v. I have set it to 1.25v is this ok.

Thanks.

[HiVizMan]

When you see the voltage increase is that during a stress test by any chance?


You should leave CPU Pll on auto there is little to be gained from changing.

[TIGGER]

Thanks for your reply.

As you can see here it went up to 1.3xx, this was jus from opening a new tab on chrome.


I will put the pll voltage back on auto. Is 1.8xxv ok for pll then?

thanks

Tigger

[HiVizMan]

Most certainly better to leave it on auto.

I would like confirmation of the vcore, would you please download the latest CPUz and open that.

And did you make any other changes in BIOS or have you been using AIsuite at all in OS to make changes to your system?

[TIGGER]

Here is the cpu-z shot


No other changes, I just wanted the voltage on a lower manual setting, Auto was running it too high.

Never even installed ai suite on my rig.

thanks again 🙂

[HiVizMan]

OK now looking at CPUz the voltage seems perfect, does it jump up when you open a browser tab like you saw on Coretemp?

Basically I trust CPUz and I know most of its weaknesses and foibles.

[TIGGER]

No it does not, it seems ok then, shall i just leave it as it is?

Thanks for the help 🙂

[HiVizMan]

Yes in that case it is all good.