cancel
Showing results for 
Search instead for 
Did you mean: 

MAXIMUS VII hero. B2

Spatt33
Level 7
Hi, I am constantly getting the b2 error on in initial boot, the first time I hit the power button it starts up and then sits at the b2 code with no video output in the monitor and the vga light is on, then if I hit the reset button it boots fine into windows most times, sometimes requiring multiple attempts. Does anyone have a solution
So more specs see my profile thanks in advanced

Have tried

CMOS reset
Reinstall of windows
Bios flash - oldest newest and some versions in between
Gpu bios flash
Tested all different settings in bios

I'm lost for ideas
Once it boots it runs beautifully just getting there that's the issue for me
649 Views
5 REPLIES 5

nickbaldwin86
Level 7
tried removing the cards and run on-board?

What slots are your memory in? I had to swap from Red to black... still cant figure out why but had to.

Spatt33
Level 7
Haven't tried onboard want to avoid removing the cards again if possible
Will try changing to the black Simms and see if that works

Spatt33
Level 7
Have swapped the memory to the black slot and bingo it works no b2 hanging and it boots first time thanks so much
Do u know what causes this issue?

nickbaldwin86
Level 7
check out the other threads here. a few others are having the issues we both had.

Read this thread, the last current post specifically, post #10

https://rog.asus.com/forum/showthread.php?61252-Maximus-VII-Hero-and-red-RAM-slots

Those red slots ...GRRRR

it's a great board and love the features but this one is just lame.

Well glad you got it running!

Spatt33
Level 7
And the error b2 is back 😞
I'm lost
No error of onboard video tho