cancel
Showing results for 
Search instead for 
Did you mean: 

Maximus VI Formula Discussion Thread

Raja
Level 13
Maximus VI Formula Overview and Discussion Thread

The Maximus VI Formula should be available to purchase in a few weeks. A motherboard many have been waiting for, and for good reason. Plenty of cool features on offer, we won't go into them all, but have picked out some of the salient ones for you to check out below:

Board layout and features at a glance:



Gaming Features



SupremeFX






The Maximus VI Formula sports a specialized audio solution called SupremeFX. Based on Realtek’s latest ALC1150 chipset, the Cirrus Logic DAC and the TPA6120 headphone amplifier and an optimized PCB layout - isolating PCB layers and spacing sensitive traces away from other areas of the motherboard. Shielding is also utilized to minimize spurious noise from entering signal lines. High quality capacitors are used for power supply decoupling to minimize ripple and provide a low impedance at audio critical frequencies. The end result is a 120dB SNR, placing the Maximus VI Formula's onboard audio solution on par with the best discrete soundcards available.


On the software side, the latest addition to the package is Sonic Radar:






The Sonic Radar GUI


Sonic Radar is a HUD that is useful in FPS games. It shows a visual representation of where sounds are coming from. The location of footsteps, gunshots, explosions and anything else is shown in the 360 degree HUD while gaming:




BF3 – Sonic Radar showing direction of audio effects




The HUD can be made more transparent and its location on the screen changed. Sonic Radar very useful feature when gaming with stereo headsets, where surround effects are simulated and may not be easy to pinpoint.



On the subject of headsets, Perfect Voice has been added to improve the clarity of VOIP calls. It’s a software based filter that uses digital signal processing to remove noise pickup from your mic while making a call:






DSP helps reduce ambient noise for clearer comms



Perfect Voice works with any plug in microphone/headset to clean up voice transmission during calls.




ROG RAMDISK





With high density memory modules and kits becoming the norm, many of us have an abundance of free memory on our systems that never gets utilized. ROG RAM Disk has been coded to take advantage of that free space to help speed up the system.





ROG RAM Disk GUI



Unlike many free RAM drive tools, ROG RAM DISK has no size limitations – up to 80% of the free memory (not used by the OS) can be configured as a RAM drive.


To get you an idea of how fast a RAM drive is, check the screenshot below:





10000 MB/s sequential write speeds



Applications stored on ROG RAM DISK are written to hard storage (HHD/SSD) when the system is prompted for shutdown.



Of course, re-installing games to the RAM DISK would be a painful experience. That's why ROG RAM DISK has a feature know as Junction Mode.








Setting a junction point to a game folder allows critical game files to be transferred to the RAM DISK without interfering with the original installation. Just point the software at the game folder and it will take care of the rest. This way, critical files such as maps can be accessed directly from the RAM DISK, speeding up load times.



Discussing features is fine, but what really matters for many users in knowing a board can overclock and run stable. How about 24 hour stability testing? Here's a few screenies from JJ, showing the Maximus VI Formula running different memory configs and CPU overclocks:




Over 24 hours AIDA64 passed at 4.7GHz DDR3-2800 16GB 4x4




Over 24 hours AIDA64 passed at 4.6GHz DDR3-2133 32GB 8X4





4.8GHz DDR3-2400 AIDA 1 Hour - right at the limits of the CPU and cooling






Use this thread to discuss/share results when you get your boards folks 🙂
648 Views
1,087 REPLIES 1,087

Antony-rog wrote:
Thanks for answering thebadwolf79! I did actually had to reinstall AI suite.
About BIOS bugs. I faced a power loss yesterday and the system would not restart for nothing! I tried every version avalible on the website and I actually had to flash it to W7 x64 1102 and open the case :mad: take off the vga card, change to off the fast boot button on the MOBO, boot it first with onboard vga, change settings manually and only then boot it normally.
Really frustrating this situation and worst of all, I don't even know why this happened. The other PC came back just fine and it's an P5Q.
So far, it's working normally.
Anybody else still having issue booting the system?


That's odd, did you make sure to use the Clear CMOS button on the back after you flashed the new version?

Antony-rog
Level 8
Sure did! Actually did it like twelve times the same procedure with different bioses.

Danesa
Level 7
I can't install the kaspersky I got with my M VI Formula MB. I am using Windows 8.1. And how can I Activate if I install a downloaded copy? Any advise?

DeltaViper4
Level 7
Yea the unfortunate truth is kaspersky antivirus 2013 is incompatible with windows 8.1 and Ive read on here somewhere that their is currently no plans for an update for us owners of the M6F board.
Corsair 750D | Maximus VI Formula | 4770K @4.5 | H100i P/P | Vengeance Pro 16GB 2133
ASUS GTX 780 DCII | Intel 520 SSD 120GB x2 | EVGA Platinum 1000W | Windows 8.1

Antony-rog
Level 8
About Kaspersky, I haven't installed yet on Windows 7. I think the end of W8 will be pretty much like Vista, 2000 and 98NT. Abrupt and ugly.
They already announced the W9 for next year. I have the damn thing, but I still prefer W7 over it.
What happened to the team who developed W XP? Probably all fired, dead or working with Linux now 😛

Anyone using successfully the latest BIOS version?
Thanks!


Anyone using successfully the latest BIOS version?
Thanks!


bios 13.02 running here without problems.

Antony-rog
Level 8
Any particular feature you disabled or enabled to get it running properly?
How did you updated it? By the Connect button or the EZ Update?
Thanks!

Antony-rog wrote:
Any particular feature you disabled or enabled to get it running properly?
How did you updated it? By the Connect button or the EZ Update?
Thanks!


i always install bios with rog-connect button.
no particulair settings needed.

dirtyblacksocks
Level 7
Guys I apologize for the noob quality of this question, and if it's already been asked I apologize even more. Simple question - can this board support three way SLI? Can I stick three 780 Ti's on this thing, or do I need to go with an EXTREME to get that support?

Vega
Level 7
It would drop two of the slots down to 4x PCI-E, wouldn't be worth it. For 3-4 way SLI you really need a PLX chip unless you go X79.