cancel
Showing results for 
Search instead for 
Did you mean: 

Maximus VI Extreme 4770k

TMSOCTAN
Level 7
Hello everyone,

Don't mean to desrepect anyone or any forum rules, but since I'm new around here I don't know if this is the correct chat room to talk about my issue.

I have an Asus Maximus VI Extreme with i7 4770k running on a full watercooled system (cpu+3xgpu+Ram+board) with 3 rads (1x360mm Slim 1x200mm 1x120mm) with an EVGA 1300W Supernova PSU, and I'm having issues when it comes to overclocking.

Who or where can I consult to help me setup the system with one OC profile that works stable??

The board Bios has two many details to work with and it turns out to be very complex for me...

I would appreciate very much the help from you.

Best regards to all
175 Views
3 REPLIES 3

BIGGDOG
Level 7
I am far from an expert but you may find some info here.
http://rog.asus.com/forum/showthread.php?33488-Maximus-VI-Series-UEFI-Guide-for-Overclocking&country...

Please note that a couple of members on this site I consider to be very helpful when it comes to this matter unfortunately I cannot remember the names. Look at some threads you will find them.

juanccgg
Level 7
There are a few videos that Asus put out. There were very helpful.
The first link covers manual overclocking. The second one covers the AI Suite 3 software package.

http://www.youtube.com/watch?v=Z7zPu9255ZI
http://www.youtube.com/watch?v=BoaAT5TkXc4

HiVizMan
Level 40
TMSOCTAN wrote:
Hello everyone,

Don't mean to desrepect anyone or any forum rules, but since I'm new around here I don't know if this is the correct chat room to talk about my issue.

I have an Asus Maximus VI Extreme with i7 4770k running on a full watercooled system (cpu+3xgpu+Ram+board) with 3 rads (1x360mm Slim 1x200mm 1x120mm) with an EVGA 1300W Supernova PSU, and I'm having issues when it comes to overclocking.

Who or where can I consult to help me setup the system with one OC profile that works stable??

The board Bios has two many details to work with and it turns out to be very complex for me...

I would appreciate very much the help from you.

Best regards to all


There is no need to make multiple post my friend. The same people are going to respond anyway.

I have replied in your other thread.

Thread closed.
To help us help you - please provide as much information about your system and the problem as possible.