cancel
Showing results for 
Search instead for 
Did you mean: 

Maximus VI extreme 2-way SLI

bitman
Level 10
I'm getting ready to do a 2-way SLI set-up with 2 Asus GTX 770 water cooled cards. My Question is the manual and Asus say I should use slot 1 and slot B2 but the EK water block I'm buying from FrozenCPU uses the triple bridge to connect the 2 cards which means I must use slot 1 and slot 3 the 4th one down the red slot not the black 3B slot. I'm I going to run into any problems using this set-up and do I have to change any thing in the Bios? My first time doing a SLI build so I could us any help you all can give me Thanks Stevebit
5,231 Views
5 REPLIES 5

Myk_SilentShado
Level 15
You must use slots 1 and B2 for 2 way SLI and you should change the block order and get the dual bridge

The dual block that is available from EK doesn't have the right spacing for the maximus VI Extreme board that I can tell the dual block is for the V version of the board. I don't understand why Frozen is selling me the triple block then I guess I will have to call them again. what will happen if I use slot 1 and slot 3???

Myk_SilentShado
Level 15
Hmm, well there should be an updated version for the VI Series boards, would you mind sharing links with me please of the dual and triple bridges?

HiVizMan
Level 40
Go over to the EK shop and use the hardware configuration tool, you will see heaps of bridges that work with the M6E
To help us help you - please provide as much information about your system and the problem as possible.

HiVizMan wrote:
Go over to the EK shop and use the hardware configuration tool, you will see heaps of bridges that work with the M6E


There is also this option too 😛