03-28-2012
09:35 AM
- last edited on
03-06-2024
09:21 PM
by
ROGBot
04-04-2012 12:29 PM
Spathi wrote:
The sticks are 1.65V, so make sure VccIO is at least 1.175V (1.175V might work better than 1.2V). 1.65V is not the best for Sandy.
Also you are using 2 twin packs, so don't get them mixed up and try your PC with just one set installed.
04-06-2012 04:10 PM
04-07-2012 02:24 AM
04-07-2012 03:54 AM
HiVizMan wrote:
May I suggest that you do a full clean install of your OS. If it was hardware you would be getting a Microsoft error report each time your system rebooted saying your system has experienced a unexpected shut down, are you getting that message. If yes then there is an error report being generated. You are able to access that report.
04-07-2012 07:58 AM
04-07-2012 05:49 PM
HiVizMan wrote:
Please do provide the error report we might be able to help isolate what is causing the issue.
04-08-2012 01:42 AM
04-08-2012 09:25 AM
HiVizMan wrote:
It looks like your NIC (Gigabit LAN) is the cause.
Remove your LAN cable and run your PC for a few days and see if the problem continues. Or swap out the LAN port you are using and try that.
04-10-2012 01:41 AM
HiVizMan wrote:
It looks like your NIC (Gigabit LAN) is the cause.
Remove your LAN cable and run your PC for a few days and see if the problem continues. Or swap out the LAN port you are using and try that.
04-10-2012 06:00 AM