Hi all
I have a Maximus IV Extreme based computer which i use as a secondary, which I wanted to upgrade from Windows 7 to Windows 10.
The upgrade to Windows 10 was successful, and was straight forward, where I have a Corsair SSD installed in the Intel controller.
The issue I have is that I have 2 7200rpm drives installed, each with 2 TB storage, in the Marvell Raid Controller, and installing Windows 10 doesnt detect the driver for it.
I went and used the Windows 8 driver available on Asus website called:
Marvell SATA Driver V1.2.0.1027 for Windows 8 32bit & 64bit.(WHQL)
The driver is detected as valid and the drives becomes available and is working. The problem I have is that after a reboot the system goes into a panic and tries to repair.
Does anyone have a valid approach or driver reference for this situation?
Thanks!
