cancel
Showing results for 
Search instead for 
Did you mean: 

LINX and results..

lassek
Level 9
Hi all.

I remember that I was told in this forum to try out Linx and see what kind og Gflops I was getting compared to Prime95 which I normally use.

Well I downloaded the program and tried with and without HT to see if any difference in Gflops output.

@ 4.8, LLC=High, 1.45v HT = OFF... I am only getting 98 Gflops? With HT = ON = 80 Gflops!

Remember I dont have any downclocking here! Is my scores normal?

Maybe I remember wrong but isnt I supposed to have like 198 Gflops or am I completly wrong?


ALSO : What should the Linx settings be? stock? (problems size: 10k, mem: 772?, run : 1?)

Lasse
11,817 Views
15 REPLIES 15

lassek
Level 9
Someone please post there result.. I cannot break 100 gflops w or wo HT. NO downclock @ 4.8 .. My LinX is v. 0.6.4

HiVizMan
Level 40
Sadly I have no idea what CPU you are talking about, I can guess of course but that would be foolish of me. So I am unable to offer any constructive comment at all. So sorry.
To help us help you - please provide as much information about your system and the problem as possible.

lassek
Level 9
OH! I am really sorry!!!! Its a 3930k! on a R4E

SirOli
Level 7
@ 4800 Ht off you should get ~200Gflops

If there's no downclocking at all, you got an older Version of Linx AVX Libarys or your CPU current Capability is lower than 120%.
Try to check the Digi Power+ Section in your Bios. If the CPU current Capability is 120% or above you should update your Linx.

4800Mhz. Ht Off Screenshot:

HiVizMan
Level 40
No problem 🙂

Here is the latest version it has the changelog and the read me included.

http://www.mediafire.com/?66bsnawogu0wxdo
To help us help you - please provide as much information about your system and the problem as possible.

lassek
Level 9
OK! THAT LinX version did something!! It boosted to 185 Gflops! but not as high as yours..


Are there any particular setttings I need to set Linx at to have an apple to apple compare?


EDIT: Also that LinX on your 202 Gflops picture is not there same as the one I just DL´ed?

EDIT2 : Doing a "ALL" mem got it to 192 Gflops.

lassek
Level 9
I dont know how you can get 12 Gflops more with the same settings?

Forgot to say my current cap. is auto which reads in AI 180%

SirOli
Level 7
Try higher Mem Speed.
My Screen shows a 2400Mhz. configuration with CL10 and tight subtimings.
But normally mem settings should not make the big difference. (~2-4 Gflps.)
You can also push up the CPU current Cap. to 180%.

lassek
Level 9
Well my current cap. IS 180% via auto! I can check it manuel to 180% but that shouldnt make a difference...

I am running 1866 @9-9-9-24-2T.