©ASUSTEK COMPUTER INC. ALL RIGHTS RESERVED.

Werewolf486 · ‎05-25-2012

I need some help trying to make my system more stable. I found that the auto setting on my ram had all my settings wrong for latency so I manually set them and suddenly my system jumped 1000 on 3dmark. Now I need to know how to set my voltages in BIOS for my GPU cards. The reason is this, I keep getting CTD, total system crash that require system reboot. This happens 1-5 times a week with 11.6 ati drivers. When I updated drivers from 11.6 to 12.4 I had BSOD's and lots of CTD's as soon as I started to play MWLL which is a FREE mod to Crysis Wars. It would happen as soon as I got in game or into a mech and started driving it. I'm an Alpha tester and it gets very annoying when I have this while testing. So I rolled back my drivers to 11.6 which was more stable.

So how do I adjust my voltage settings for my GPU's in BIOS?

HalloweenWeed · ‎05-25-2012

I'm not familiar W/old RE board BIOS' (it's been a long time), but perhaps if you post pics of the BIOS, and give your mem pt# or specs, I might be able to help you. I would need pics of the voltage setting and memory timing areas of your BIOS. I did have an R2E once.

i7-3930K; Asus RIVE; G.SKILL Ripjaws Z 4x4GB DDR3 1866; MSI 7870 2GD5/OC; Crucial M4 SSD 256GB;
Corsair 1000HX; Corsair H100, 4x Excalibur 120mm PWM CPU Fan p-p, AS5; SB X-Fi Titanium Fata1ity Pro;
Dell U2412m IPS 1920x1200; Cooler Master HAF 932 case; Tripp-Lite OMNIVS1500 UPS fully Line-interactive.
(EVGA site: )

And I have a second (wife's) computer, Eve.

Overclocking is useless to me if it is not rock stable.

Werewolf486 · ‎05-30-2012

Bump, still need help with this....how do I set voltages in bios for my GPU?

LGA775 Rampage Extreme Bios help please.