Hello to everyone,
My system is Rampage IV Extreme + 3930K + G.Skill 1866 16GB (4 sticks) + NH-D14 cooler. I aim to stay at 4.3GHz.
I have read in another post that some people (Toddd240) are reaching -0.065 vCore offset voltage. I don't know what is wrong with my settings, but my system is unstable even if I go below -0.010 vCore offset. Another person (Conard) says that he could achieve this with no LLC. If I set LLC to Disabled/Regular, then I can't do negative offset at all.
Here are my BIOS settings. I have offset at -0.020 right now, but it definitely crashes in Prime 95 and also sometimes crashes by itself, so it's not stable at all. Please see if there's something definitely wrong with my settings.
//========================================================
My current BIOS is v3101:
Ai Overclock Tuner: Manual
CPU Level Up: Disabled
BCLK Frequency: 100.00
CPU Strap Auto:
ClockGen Full Reset: Enabled
Turbo Ratio: By All Cores, 43
CPU Clock Gen Filter: Auto
Memory Frequency: 1866 (native freq. and timings)
Xtreme Tweaking: Enabled
EPU Power Saving Mode: Disabled
CPU Vcore: offset, -0.020 (for now)
VTT CPU Voltage: 1.10000
2ndVTTCPU Voltage: Auto
VCCSA: Manual, 1.100
DRAM Voltage: all set to 1.5 volts (native ram voltage)
CPU PLL Voltage: 1.78125
PCH 1.1v Voltage: Auto
CPU Spread Spectrum: Disabled
PCIE Spread Spectrum: Disabled
DIGI+ Section:
CPU Load-line Calibration: Medium
CPU Current Capability: Auto
CPU Voltage Frequency: Auto
VRM Over Temperature Protection: Auto
CPU Power Duty Contro: T.Probe
Vcore MOS volt. Control: Auto
CPU Power Phase Control: Standard
CPU Spread Spectrum: Disabled
CPU VCORE Boot Up Voltage: Auto
VCCSA Load-line Calibration: Regular
VCCSA Current Capability: 110%
VCCSA Fixed Frequency: 300
CPU VCCSA Boot Up Voltage: Auto
CPU VTT Switching Freq: Auto
CPU VTT Over-Current Protection: Enabled
DRAM-AB Current Capability: 110%
DRAM-AB Voltage Frequency: Auto
DRAM-AB Power Phase Control: Optimized
DRAM-CD Current Capability: 110%
DRAM-CD Voltage Frequency: Auto
DRAM-CD Power Phase Control: Optimized
PCH 1.1V Switching Freq: Auto
CPU Configuration Section:
Intel Adaptive Thermal Monitor: Enabled
Hyper-threading: Enabled
Active Processor Cores: All
Limit CPUID Maximum: Disabled
Execute Disable Bit: Enabled
Hardware Prefetcher: Enabled
Adjacent Cache Line Prefetch: Enabled
DCU Streamer Prefetcher: Enabled
DCU IP Prefetcher: Enabled
Intel Virtualization Tech: Enabled
CPU Power Management Configuration Section:
CPU Ratio: Auto
Enhanced Intel SpeedStep Tech: Enabled
Turbo Mode: Enabled
CPU C1E: Auto
CPU C3 Report: Enabled
CPU C6 Report: Enabled
CPU C7 Report: Enabled
//========================================================
