Hello. I recently bought the maximus hero VII and a i7 4790k
I updated the bios with the AI suite 3 software to the 2201 version (guess that's the lastest version )
I keeped all the bio setting to default, so most of them are set to auto. ( i just turned off the extra MB red light stuff, and setup fan speed in PWR )
I use the lastest AI suite 3 ( V10083 ) and just setup my own profil into Xfan xpert3
So the TPU thing, set my CPU to 4.4mhz max. Until there, its perfectly fine.
but i saw that the vcore goes up to 1.344 ( ai suite3 value, CPU-Z tell me 1.325 ) at 100% load ( tested with OCCT ) which is, according to somes ppl ( from other forum ) with the same cpu and same 4.4mhz speed.. clearly high.
My beginner assumption about that : AI suite3 TPU boost that much the Vcore during load.
So my question is, how do I change the TPU setting to keep the 4.4mhz and vcore in adaptative, but get a "normal" lower vcore voltage when full load ?
thanks !
PS: i hope my explanation was clear enough. Never been used to tweak thoses things, and my english is far to be perfect.