help overclocking maximus extreme iv-z with 2133 kingston genesis hyperx 16gb

[deseroner]

cont. http://www.overclockers.com/forums/showthread.php?t=704840, I had to set vcore to 1.48 4.9 to be stable setting ram MHz to 1600. please read post.review of 2133 http://www.overclockers.com/kingston...3-quad-channel

[deseroner]

alright i got computer to boot and pass memtest86 2400 12-13-12-32 ivy is digging it.

[HiVizMan]

deseroner wrote:
alright i got computer to boot and pass memtest86 2400 12-13-12-32 ivy is digging it.

Ivy loves memory clocking 😄

Nice one mate.

[psyside]

Set VCCIO to 1.0

Set vcore over current protection to 130%

Set PLL overvoltage to enabled.

Set Vcore switching freq to 350 (manual)

Set BCLK to 100 not 100.4

Set CPU spread spectrum to disabled.

Set Vcore PWM mode to extreme.

Disable iGPU if your not using it.

[deseroner]

thank you , i used these settings set vccio to 1.1 .got it stable so far at 1.31v 4.7 tweaked the antec settings to keep the temps low,passed aida64 test 1 hour.i had bsod elq62x64.sys/ptcpip.sys,i installed all new nic drivers.so so far gone the error message.windows 7 fun.

psyside wrote:
Set VCCIO to 1.0

Set vcore over current protection to 130%

Set PLL overvoltage to enabled.

Set Vcore switching freq to 350 (manual)

Set BCLK to 100 not 100.4

Set CPU spread spectrum to disabled.

Set Vcore PWM mode to extreme.

Disable iGPU if your not using it.

[psyside]

Glad to know it worked 🙂