here i reinstalled OS windows 7 i decided to check event log on every installation of drivers . I installed only supplied Asus drivers DVD on 1st boot i got no errors on event log but after installing Intel ahci drivers i found this error poping out adma000 drivers load failed
BTW: when i setup my rig for the first time i installed all updated drivers found on asus drivers page and the performance of my system very low and now i only installed supplied drivers now my system work good enough
And i also contacted technical support here is the response i got :
1:
Thank you for contacting ASUS Customer Service.
My name is Carter and it is my pleasure to help you with your problem.
For this issue, may I ask what programs would run slowly on this computer?
If the issue appears after you have installed some software or hardware, please uninstall or remove them and check if it is helpful.
Please have a check if there are some virus in the OS.
Please also confirm that the memory modules are installed correctly on this board.
For the ACPI error, if you insert and let the installation DVD that comes with the motherboard autorun, it will automatically install the "Asus COM" service and this will get recognized as a "AMDA000" interface.
2: about Marvell drivers on h87 chipset
Sorry, according to the spec of this H87M-E board, I am afraid to say there aren't the Marvell sata ports on it, so you don't need to download and install the Marvell sata driver.
For the ACPI error in Event viewer, may I ask if it came from the first day you bought the board?
If the issue appears after you have installed some software or hardware, please uninstall or remove them and check if it is helpful.
Or please check if it came after a windows update?
If still, please right click the AMDA000 in the Device manager and choose to unistall the driver, then reboot the computer and check if it would work.
3:
For the Marvell SATA driver, I would suspect it to be wrongly put on the page of this board, sorry for the inconvenience.
As you see, the AMDA000 is a BIOS component found on Asus motherboards to allow Asus utilities and software to communicate with BIOS components. For example, Asus USB 3.0 UASP booting software may need this device to be working.
4:
As I previously mentioned, it is possible that the AMDA000 previously isn't installed correctly, then the system couldn't normally apply it which caused the error.
So please right click the AMDA000 in the Device manager and choose to unistall
the driver, then reboot the computer and check if it would work.
5: about ACPI, AMDA00 errors
Unofortunately I am afraid to say that I haven't recieved reports about other customers feedback this issue.
For this issue, I suggest you to clear the cmos to load the bios to default settings and try again.
There is CMOS Jumper :
1.) Turn OFF the computer and unplug the power cord.
2.) Move the jumper cap from pins 1-2 ( default ) to pins 2-3. Keep the cap on pins 2-3 for about 5-10 seconds, then move the cap back to pins 1-2
3.) Plug in the power cord and turn ON the computer.
4.) Hold down the < Del > key during the boot process and enter BIOS setup to re-enter data.
If still, if possible, please back up the datas and reinstall a clean OS for a test.
this is the response i got
