Having some issues with my ASUS Rampage IV Gene SATA 6 Intel plugs

[SKAVANGER408]

This is my second board from Asus, the other board died on me. When I had my Raid 0 going I used Sata6G_1 and Sata6G_2 plugs for my SSD's. Then I started getting random blue screens, so I disabled the Raid 0 and ran them regular. I still kept getting random blue screens. So I unplugged them from the Intel Sata slots and used the other Sata6 plugs. I still get random blue screens but it's not as often as before.

My SSD's are Corsair GS 240gb with the firmware update.

I did update the Bios/Sata software and my Ethernet plug is dead as well. I stopped overclocking and everything is back to stock.

If I can get some help or solutions, I would appreciate it.

Thanks in advance.

[m_oreilly]

why do you think your ssds or raid or intel ports are giving you bsod? which OS are you using?

[SKAVANGER408]

m.oreilly wrote:
why do you think your ssds or raid or intel ports are giving you bsod? which OS are you using?

I'm using windows 7 home and I haven't had as many blue screens as I did with the Intel sata ports.

[DooRules]

Most likely to do with your setup or the drives themselves bud.

Can't see the intel ports causing bsod's.

[SKAVANGER408]

DooRules wrote:
Most likely to do with your setup or the drives themselves bud.

Can't see the intel ports causing bsod's.

Think it could be the SSD's? I have all the correct software installed.

[SKAVANGER408]

I guess no solutions or input?

[Nodens]

Are you using a RSTe 3.5.x, 3.6.x or 3.2.x driver? If yes switch to an older RSTe 3.1.x or RST 11.2+ driver.

[SKAVANGER408]

Nodens wrote:
Are you using a RSTe 3.5.x, 3.6.x or 3.2.x driver? If yes switch to an older RSTe 3.1.x or RST 11.2+ driver.

You are a life saver man, that did the trick:o I appreciate it and I was losing hope slowly.

Thanks again man you're the man:cool:

[Nodens]

Glad I could help:)