Hey, I don't know if most of you may notice the update on my current R4E and how I said in another thread how I decided to RMA the board where I got it from.
Well I just got a response showing that there is one slight bent pin on the motherboard and they usually charge for this for repair but will do it for free for the goodwill. (Just a note that this First R4E board got brought from PCCaseGear not Gamedudes)
But aneway I didn't built that board, Gamedudes did & Remember how they couldn't find the fault on it on why it wont post (It lasted for 6 months until the cold post issue started to occur).
That was when I thought I give the board a 2nd chance and get the replacement R4E from Gamedudes since they couldnt find the fault with the current one, that has the Cold post issue
and so that was when the cold post turn on issue again occurred during the 4 or 3 months time and that's when I decided to get the Rampage IV formula from PCCaseGear and did the build myself.
After I took the cpu and checked the Gamedudes R4E board the pins were bent like nuts at places and I was like.. "man they didn't look after the board properly"
but aneway, I'm being looked after on PCCaseGear side of it, (and they gonna test on it before sending it back) but on the R4E board but not sure what to do with it..
Heres the pic they showed on the PCCaseGear Rampage IV Extreme.