Going back

[dnoam]

HI , since flashing to 1305 for extreme rampage 4 i am getting increased numbers of BSOD, i want to falsh to older version but keep gettin in th EZ function that image is oudated? how do i flash to earlier versions?
Thanks

[dnoam]

i am hilding my horses for the next 3 days and i will do nothing , when i will be back i will report
thanks again.

[dnoam]

https://docs.google.com/document/pub?id=17VKzOB5CL5EtIelw5tGsj2CqjBk3O0OU5VPe6CUoFso
GSKILL F3-14900CL9?.acording to the site it has to be in x.m.p mode and by me in the old firware it was on "auto" (but worked) can it be an isuue with the 1305 update, does the x.m.p mode has any effect and can cause a BSOD?
THANKS

[goodtrips]

Your board comes with a very easy way to revert to an older BIOS. I, too, had issues with 1305 and reverted back to 1202. Just download whatever BIOS you want to revert to and follow the instructions that are in your manual but this hyperlink also shows you how to do it. It is really very easy.

http://event.asus.com/2012/mb/USB_BIOS_Flashback_GUIDE/

[HiVizMan]

What this flashback does is copy the bios on the B chip to the bios on the A chip. So what ever is on B will then be on A too.

[Necrosan]

Didn't know there was an LED indicator for the selected BIOS - good stuff to know!
To the OP - for what it's worth I really doubt the BIOS update was causing your issues.

[HiVizMan]

XMP profile will make more than a few changes to your voltages and other settings too. If you can enable XMP that would be a good.

[dnoam]

HI. back to my table and here is where it stands now , i turn to x.m.p mode and all seems ok memory wise, i really do not understand why it worked before and with 1305 it crushed or what is really the difference and i will happy to get an explanation from those whi knows it all.
i also founf in gskill site that i have to play with the voltage of CPUVCCA TO 1.250 ........ what is that thing and is it realy an important issue?, but a second issue now appears , my usb things (sitck , mouse etc are reacting very very slow , iy takes much more time than before for comuter to identify them (is it also and issue with 1305)
why the do not make them more stable with upgrade , why all become less stable.?
thanks

[HiVizMan]

With some USB devices it does take forever for the BIOS process to complete, so I make sure I do not leave USB storage devices connected. Just my mouse, keyboard and camera. The rest I take out.

If your ram is working fine now, do not mess with it. That is my number one rule. Do not fix stuff that is not broken. 🙂

[dnoam]

understood :cool: