cancel
Showing results for 
Search instead for 
Did you mean: 

EZ Plug connectors (6-pin EZ_PLUG_1; 4-pin EZ_PLUG_2)

lenehan
Level 10
Hi.

Would like to know EZ Plug connectors (6-pin EZ_PLUG_1; 4-pin EZ_PLUG_2) what is that for? Do we need to plug it in? Thank you.
Change is the law of life. And those who look only to the past or present are certain to miss the future.
17,160 Views
6 REPLIES 6

Arne_Saknussemm
Level 40
6 pin is more PCIe power if you are running 4 GPUs. The 4 pin is RAM power if you have all slots filled with high frequency RAM etc. so normally you wont need it. The board will draw as much power as it needs so even plugging them in without need will do no harm I guess.

Arne Saknussemm wrote:
6 pin is more PCIe power if you are running 4 GPUs. The 4 pin is RAM power if you have all slots filled with high frequency RAM etc. so normally you wont need it. The board will draw as much power as it needs so even plugging them in without need will do no harm I guess.


Thanks. Was wondering if it related to http://rog.asus.com/forum/showthread.php?19798-R4IVE-system-unstable.-Your-CPU-ratio-may-be-down-at-...
Change is the law of life. And those who look only to the past or present are certain to miss the future.

lenehan wrote:
Thanks. Was wondering if it related to http://rog.asus.com/forum/showthread.php?19798-R4IVE-system-unstable.-Your-CPU-ratio-may-be-down-at-...


Thanks. Will try it out,
Change is the law of life. And those who look only to the past or present are certain to miss the future.

Sorry to bring up an old post, but does this work with for the 6-pin on the motherboard? I think EZ_PLUG_1.

http://www.ebay.com/itm/4-to-6-PIN-Adapter-Harness-for-EVGA-NVIDIA-GeForce-GTX-560-Ti-or-GTX-550-Ti-...

Zka17
Level 16
Well, you could plug in those EZ connectors and see if it's still unstable...

Retired
Not applicable
if you have the cpu llc at around extreme 160-180%, and doing some serious oc, i think it wise to have the 4 pin cpu plugged in..

I plugged in mine, when going above 5,1 ghz

The gpu 6 pin plug cant be used with 1/2/3/4 gpus,,