EZ_PLUG_2 (4 pin) use?

[djdelirius]

What is the EZ_PLUG_2 for on the MVIE? Is it to provide power to the PCI ports like the EPS or from the mobo to an add-on card? If it's from the PSU to mobo then are you just supposed to use a molex to PWM 4 pin adapter?

[Chino]

The EZ_PLUG_2 provides power to the back IO ports. You need a 4 pin floppy driver power connector.

[wizzzzzzzzzzer]

i was also wondering about this connection --should it be connected or not ?-- the install guide mentions nothing about it , its only when looking at the manual its says its for that back i/o ports ..plug one seems to be only for when you are running 4 gpu's so does this have any relevance to plug2
i just finished my build and haven't connected it

[djdelirius]

wizzzzzzzzzzer wrote:
i was also wondering about this connection --should it be connected or not ?-- the install guide mentions nothing about it , its only when looking at the manual its says its for that back i/o ports ..plug one seems to be only for when you are running 4 gpu's so does this have any relevance to plug2
i just finished my build and haven't connected it

OK....I kinda felt stupid asking that question so glad I'm not the only one.

[HiVizMan]

I would suggest that you can live without it connected if you do not use your back USB ports as charging ports for devices.

[Retired]

yes i agree with Hiviz.........