Dynamic CPU help

[Ozy311]

Hi Guys,

Rig is running great on the RIVE. I have my i7 4930 running at 4.6ghz with 1.375v for a week now. The issue is that it runs at 4.6ghz all the time even at idle. I set the "Sync All Cores" to 46. I'd like to let the CPU step down the speed when there is no CPU load. How can I have my cake and eat it too? My idle wattage is 195W with this setting and 3 GTX 780 cards.

Thx

[Praz]

Set the Windows power plan to Balanced.

[Arne_Saknussemm]

Or if you want to keep the performance plan go into advanced options and select "processor power management" and set "minimum processor state" to 10%.

This is assuming you are ocing with offset and not manual voltage and that you have speedstep enabled.

[FireRx]

Nice Avatar, Arne :cool:

[Arne_Saknussemm]

Chers FireRx!... my halloween pumpkin 😮

[Joao_Santos]

Thank you ! Thank you...

You are fantastic, I was also having this problem for ages.
Turns out it was my Samsung SSD high performance profile on Windows power plan.
CPU performance was all set to 100% on idle.

Have a great day.

[HiVizMan]

Indeed the Samsung Magician software makes changes to the power plan.