CPU PLL Voltage with 3930K and R4E

[tistou77]

Hello

With a 3930K at 4.5GHz, it's better to leave the "CPU PLL Voltage" to 1.80V (default) or is it better to drop to 1.50V for example?

Thanks

[Retired]

hello, try different ones..

But around 1,65v seems to work fine..

Your welcome..

[HiVizMan]

Each system will have its own sweet spot, I found 1.625 worked for my best one.

[tistou77]

Ok thanks so much 😉

I'll test 1.65v, but I must also change the Vcore, or I can leave it?
It helps to heat the CPU?

[HiVizMan]

It really depends on how you OC your system - I use offset for my voltage and that allows my cpu to access the vCore when it needs it, under load, and to drop down to 0.8 when not under load.

[Raja]

CPU PLL is a low current rail, so I would not orry about changing this voltage if your system is stable.

[tistou77]

Ok thank you, I leave it to 1.80V if it does not help the OC and if it does not touch the CPU temperature.