- last edited on by
ROGBot
Got a slight issue.
Using 6 fans, 2 x chassis @ 70%, 2 x opt @ 70%
Other 2 are in CPU but no matter what I set the BIOS to, they always run at 100%.
This is either as silent or manual with max 70% speed. Using BIOS 2005, anyone else had this issue? might have to get a resistor in the wire to solve it otherwise.
Using 6 fans, 2 x chassis @ 70%, 2 x opt @ 70%
Other 2 are in CPU but no matter what I set the BIOS to, they always run at 100%.
This is either as silent or manual with max 70% speed. Using BIOS 2005, anyone else had this issue? might have to get a resistor in the wire to solve it otherwise.
Separate headers, 1 in CPU_FAN and the other in CPU_OPT.
Since the original post, now I don't even get a fan speed reading from CPU_FAN, still running at full pelt though.
Since the original post, now I don't even get a fan speed reading from CPU_FAN, still running at full pelt though.
xt-107 wrote:
i am using coolermaster pwm fans because stock
H100 fans are always run @ full speed .:cool:
I use 4 (yes, push-pull) Excalibur fans on my H100, all on CPU fan control as they are also on two Y adapters. And the fan speed control works beautifully. I do not have the H100 feedback wire connected - it's useless IMO. FYI.
i7-3930K; Asus RIVE; G.SKILL Ripjaws Z 4x4GB DDR3 1866; MSI 7870 2GD5/OC; Crucial M4 SSD 256GB;
Corsair 1000HX; Corsair H100, 4x Excalibur 120mm PWM CPU Fan p-p, AS5; SB X-Fi Titanium Fata1ity Pro;
Dell U2412m IPS 1920x1200; Cooler Master HAF 932 case; Tripp-Lite OMNIVS1500 UPS fully Line-interactive.
(EVGA site: )
And I have a second (wife's) computer, Eve.
Overclocking is useless to me if it is not rock stable.
Corsair 1000HX; Corsair H100, 4x Excalibur 120mm PWM CPU Fan p-p, AS5; SB X-Fi Titanium Fata1ity Pro;
Dell U2412m IPS 1920x1200; Cooler Master HAF 932 case; Tripp-Lite OMNIVS1500 UPS fully Line-interactive.
(EVGA site: )
And I have a second (wife's) computer, Eve.Overclocking is useless to me if it is not rock stable.
