Re: CMT16GX3M4X2133C9 Dominator GT2133 tell me what you know (Rampage IVE)

I need to know as much as I can about this ram and what I need to do to set it up properly on the RIVE at up to 2300MHz. I know most of the normal stuff about the ram but am more interested in motherboard and speed specific information along with the voltages needed to be stable at those speeds.

These are the basic stable settings up to 2300MHz. I have not tested past 2300MHz.
main voltage 1.5v timings 9-11-10-27 T2 mode 2

781 Views

15 REPLIES 15

If you haven't already done so you should also post on the Corsair forums. They are fairly helpful there and would probably have more info on the specific P/N of Memory that you have and what settings would work best.

Homewrecker wrote:
If you haven't already done so you should also post on the Corsair forums. They are fairly helpful there and would probably have more info on the specific P/N of Memory that you have and what settings would work best.

Did you ever try tightening your timings with your Ripjaws?

I be expecting this memory to arrive today.
Question, why 2300Mhz? why not 2400Mhz?

I haven't tested the memory much past 2300MHZ. Its gone farther but i haven't really tested at those speeds.

UPS delivered this memory today, and it installed without a hitch. Kinda amazing for 1.5v to be running at 2133Mhz.
I am pretty sure its the only set to date that can run a 1.5v at those speeds using the new samsung chips.
In a bit I am going to "take it upstairs" and see how it runs.. I get back to you with the findings...

Let me know what you find out. My board made it here today and is up and running. I need to update my ssd's and install windows tonight.

mcj66106 wrote:
Let me know what you find out. My board made it here today and is up and running. I need to update my ssd's and install windows tonight.

I screwed up. I forgot with the Samsung chips, when you try to push them over 2133Mhz, it's like playing with a pin-less hand grenade. Hynix was the last of the good stuff.

Seems a bit pricey for 16GB of 2133 memory. I'm sure it would run 2400+ on a good CPU with a solid IMC. It' just appears pretty over priced.

mdzcpa wrote:
Seems a bit pricey for 16GB of 2133 memory.

Sure is! pricey for the "Corsair family jewels" dominator heatsink and built in fan connector.
This set, I received from Corsair as a "gift," in exchange for some Vengeance sticks they borrowed.
G.Skill IMO is the best bang for the buck.