Crosshair V - Bios 1703 AMD FX 8120 @ Currently at Stock 16GB Corsair Vengeance / CML16GX3M4A1600C9 - 4x4GB / 1600/ 9-9-9-24 / 1.5Volt
The Raid 5 is build from 4x Seagate 2TB (ST2000DM001) flashed to latest firmware. The Hard Drives are seeming fine. Smart OK. No Bad Sectors (tested with HDAT2)
The Problem is under high load on the raid i get following BSOD:
I guess that is a Ram Problem?
Following things i tried:
- Upped DDR Voltage to 1.65 - same problem - Loaded the 4GB Settings from Bios - loosed the timings to 10-11-12-28 and raised CPU / NB Voltage to 1.4 - same problem but somewhat more stable in my opinion xD
Im Read somewhere if the board has 4 memory slots and there a stick of ram in every slot. amd fx only support 1333 mhz if the ram is dual ranked. so i lowered the speed to 1333 same problem. (i dont know if the ram is dual ranked 😐 )
Im thankful for any advice.
//edit could be that kaspersky is causing issues here? I currently not at home i will check later
i have tested the ram when i first build the system and everthing was fine. But to make sure i run memtest as you suggested and indeed one stick is faulty now. I guess its RMA time now. Do you know i have to rma the hole kit or just the faulty stick?
For the time being im currently running 8GB / 2x4GB @ Everything at Stock voltage and advised Speed and timings works great and stable.