cancel
Showing results for 
Search instead for 
Did you mean: 

Cannot set RAM to 3000Mhz in DOCP settings for B450 F Gaming Motherboard

sayak_life
Level 7
I have Asus B450 F Gaming Motherboard

Ram - G SKill Trident Z RGB 2x8GB Modules "F4-3000C16D-16GTZR" as per QVL. They are arranged in slots A2 and B2

My system fails to boot whenever i activate DOCP 3000Mhz, reverting back to 2133 Mhz.

Any solutions??
48,187 Views
14 REPLIES 14

Arne_Saknussemm
Level 40
Try setting up manually.

Set 3000MHz for RAM

Set Dram voltage to 1.35
Set SOC voltage to 1.2

Set primary timings to 16-18-18-18-38 and leave all the rest on auto

See if that boots

Arne Saknussemm wrote:
Set SOC voltage to 1.2


VDDSOC Voltage Override? My default is 0.825V. I’m having the same issue with same RAM. Only I’m using 32GB (4 sticks) with a Ryzen 7 2700X.

mikey_m
Level 7
Hi,
I am also cannot boot at 2400mhz thou I have a i7 4790k clocked at 4.7
Asus vi extreme 1150 bios version 1603
Pc boots only at 2200mhz

Any help is appreciated to get it to run at 2400 or possibly higher?

Thanks
Mike**
*

quasimodo18
Level 7
sayak_life wrote:
I have Asus B450 F Gaming Motherboard

Ram - G SKill Trident Z RGB 2x8GB Modules "F4-3000C16D-16GTZR" as per QVL. They are arranged in slots A2 and B2

My system fails to boot whenever i activate DOCP 3000Mhz, reverting back to 2133 Mhz.

Any solutions??


I have this very same memory on this board and have had no problem setting DOCP 3000Mhz with the corresponding timing settings. Perhaps try to reset all your BIOS settings back to default and start again? I have used BIOS 602, 1103, 1201 and all worked well. I have the memory in A2 and B2 also.

mikey_m
Level 7
Anyone please??

Arne_Saknussemm
Level 40
Hey c'mon..thread hijack is not cool

Especially with a totally different platform

I replied here https://rog.asus.com/forum/showthread.php?39185-Memory-Setup-Guide-For-Maximus-VI-Motherboards&p=755...

Or start a new thread

Hope a mod can tidy up

Slygosh
Level 7
sayak_life wrote:
I have Asus B450 F Gaming Motherboard

Ram - G SKill Trident Z RGB 2x8GB Modules "F4-3000C16D-16GTZR" as per QVL. They are arranged in slots A2 and B2

My system fails to boot whenever i activate DOCP 3000Mhz, reverting back to 2133 Mhz.

Any solutions??


Wich BIOS-Version is installed? The 1001 was bad!
https://rog.asus.com/forum/showthread.php?105676-Warning-Strix-B450-Bios-Version-1001-is-bad&highlig...

Arne Saknussemm wrote:
https://rog.asus.com/forum/showthread.php?57038-Don%92t-combine-memory-kits!-The-meat-and-potatoes-o...


So buying 2 16GB kits was a bad idea... There's no point in buying a 16GB kit and upgrading later unless you a buy another 4X8GB kit. Am I reading that right?