Bsod t_t

[syaoran7li]

Hey Guys,

well i am back again with another problem... This time i am getting BSODs T_T

it all started yesterday.. i was just editing a word document and all of a sudden it froze and gave me the BSOD... there was not much information on BSOD as to what caused the issue.. so i restated and went with editing again... and in a few minutes it gave me the BSOD again... and after that it kept on giving me BSODs at random interval... completely random sometimes in 5 min sometimes after 30 mins.... but i tried going to safe mode but didnt give me any problem while i was in safemode.. so then i thought maybe it time i format my pc which i actually wanted to do for a long time.. so today morning i started reformatting the pc.. i was on windows 7 so i thought i will try windows 10 and so i started installing it... installation went fine... and after a few mins of complete installation i got a BSOD saying something "WHEA uncorrectable error".. this time it was quicker.. i mean the interval of BSODs.. sometimes it gave BSOD at login screen and sometimes after logging in...

then i thought maybe compatibility issue so i went back to windows 7.. this time everything was fine.. there was no problem.. so i started installing drivers.. when i was installing IMEI driver it froze and gave a BSOD.. and after restart tried to install IMEI again didnt work it showed some error tat some drivers could not be installed or something... and after tat it kept on giving me BSODs one after the other.. so i went to safe mode.. and i got BSOD there too..

and now its in safe mode for more than 30 mins without BSOD.. i have no idea whats happening...

i checked the Temp it was fine, Ran Prime95 while i was on win10 for abt 30mins didnt show aany error, reset bios, etc

no matter what i did i get BSOD and sometimes i dont.. now i am afraid to move my mouse cuz sometimes when i move the pointer i get BSOD..

i somehow managed to get the minidmp files...
http://www.mediafire.com/download/dn7opq2dak8nf9o/Minidmp.rar

Hope you guys can help me...

Thanks ^_^

Current Spec: Motherboard: Asus Rampage IV Extreme; Processor: Intel Core i7 3930k; PSU: Corsair AX1200; Cooler: Corsair H100; Ram: 2x 8Gb Gskill Ripjawsx; Cabinet: Cooler Master Cosmos II; HDD: 1x 1Tb Samsung, 1x 3Tb WD Caviar Green, 1x 1Tb WD Caviar Blue, 2Tb WD Caviar Green; SSD: 1x 250Gb Samsung 840 Series; Graphics Card: Asus Nvidia Geforce GTX 780, Asus Nvidia Geforce GTX 55Ti; Monitor: Asus PA248Q, 16 Inch Random Samsung Monitor(For Multipurpose) ; Mouse: Razer Naga; Keyboard: Razer Blackwidow Ultimate Dragon Age II Edition

[Nate152]

Hello syaoran7li

The first thing I would try is swapping out the ripjaws x ram for ripjaws z, ripjaws z was designed specifically for the x79 platform.

http://www.amazon.com/G-Skill-PC3-17000-RipjawsZ-9-11-10-28-Channel/dp/B00679QX0O

[syaoran7li]

Nate152 wrote:
Hello syaoran7li

The first thing I would try is swapping out the ripjaws x ram for ripjaws z, ripjaws z was designed specifically for the x79 platform.

http://www.amazon.com/G-Skill-PC3-17000-RipjawsZ-9-11-10-28-Channel/dp/B00679QX0O

Hey,

Thanks for the reply...

well i cant aford it now unless tats my only option.... but i ran memtest overnight and ha 5passes... so i think ram isnt the issue..

Thanks ^_^

[Nate152]

OK are you overclocking anything?

If you don't think it's the ram then you could try stripping down your pc to a bare minimum of components, disconnect all drives except 1 ssd with your operating system, 1 gpu and 1 stick of ram.

If it runs ok with no freezing/BSOD, add 1 component and test for a while, add another and test for a while. Keep adding one component at a time and testing. Doing this will tell you which component is causing the freezing/BSOD.

[syaoran7li]

Nate152 wrote:
OK are you overclocking anything?

If you don't think it's the ram then you could try stripping down your pc to a bare minimum of components, disconnect all drives except 1 ssd with your operating system, 1 gpu and 1 stick of ram.

If it runs ok with no freezing/BSOD, add 1 component and test for a while, add another and test for a while. Keep adding one component at a time and testing. Doing this will tell you which component is causing the freezing/BSOD.

umm no i am not overclocking anything... well im actually running now on 1 ssd removed the other drives... but i will do like u said.. remove every component and try one by one and will let u know...

[Nate152]

Ok syaoran7li

Give us an update after testing.

[syaoran7li]

I am posting as a separate reply... cuz i did so many things and i think i have rounded it off... well let me explain what i did...

last time tat is 1 day back i was running furmark.. it ran for 7 hours fine without any problem.. and when it was abt to reach 8hours it crashed and then it kept on crashing for a while like always... somi turned off the pc... removed all the connections...

connected 1 ssd, 1 graphics card, 1 ram stick, all peripherals were connected though.. started the installation of OS...
Note: Every time before installation i delete all partitions of the hdd an remake them just to clean it completely...

i tried windows 10 and it completes the installation and it restarts and then it loads for a few seconds and BSOD... so next try i switched ram sticks.. and still same result.. so then i thought ok i will clean my pc... soi took out every part except motherboard processor and cpu cooler.. cleaned everything.. and blew air using canned air on motherboard and cpu cooler...

then connected every single part but only with 1 stick of ram 1 graphics card and 1 ssd... disconnected every peripherals and went with the installation same as before.. switched ram and tried again.. this time i go blue screen during copying windows files... retried again and this time blue screen after restart..

so i gave up on windows 10 and went with windows 7... here same bsod during copying windows files.. and one time it installed and restarted and it was continuing installation and then BSOD...

then i remembered having the same problem the first time i built this pc... so i went to the threads and figured out tat i disabled all onboard devicces in bios.. so i did the same but still the same...

now no matter wat i do i get BSOD.. either during copying windows files or after restart...

i think its my motherboard.. what do you guys think??

these r the threads abt that problem i had before...
http://www.tomshardware.com/answers/id-1659250/newly-bu...
https://rog.asus.com/forum/showthread.php?32183-Newly-B...

god i am kinda stuck here.. dont know what to do.. T_T

[Nate152]

I'm back to thinking it's your ram causing the problem, have a read here what Tradesman has to say, he is an administrator for G.Skill.

http://www.gskill.us/forum/showthread.php?t=10173

[Nate152]

Thank you

The TomsHardware link is not opening but I read your ROG thread you started a while back and it seems it was working for a while when you disabled the asmedia ports, although that didn't seem to be a permanent fix.

Have you tried clearing the cmos or resetting the bios to defaults? If you are using XMP to set your ram, try setting it manually instead.

You can try removing your gpu and try with the other gpu.

You can try updating the bios.

I wish you had a stick of g.skill ripjaws z to try.

[syaoran7li]

Nate152 wrote:
Thank you

The TomsHardware link is not opening but I read your ROG thread you started a while back and it seems it was working for a while when you disabled the asmedia ports, although that didn't seem to be a permanent fix.

Have you tried clearing the cmos or resetting the bios to defaults? If you are using XMP to set your ram, try setting it manually instead.

You can try removing your gpu and try with the other gpu.

You can try updating the bios.

I wish you had a stick of g.skill ripjaws z to try.

hey,

well i dont know.. but both threads r literally the same output resuts.. so reading either one is fine..
and ya.. for like 2 years there was no problem after disabling the ports... but i got occasional blue screens but didnt bother me.. but now no matter what i do i get bsods.. and now tat i have formatted my ssd i have no way of using my pc.. anyways its gonna give me bsod so it doesnt matter.. an this time turing of the ports didnt help either...

yep i tried clearing cmos a couple of times.. resetted bios.. updated bios... still same...
and i didnt use xmp its all on defaults...
well actually i tried changing gpus.. but for some reason.. when i use 780 it gave me a display but when i used my 55ti it said tat the 780 is powered down and asked me to connect power to tat..

RAM well i dont know.. but i cant afford much now.. so i just want to make sure.. ccu if its motherboard then its gonna cost me a fortune so dont want to spend extra money on things tats not the problem.. and i cant borrow from anyone either.. none of the people i know have these kinds of setups...

but if u r really sure tat ram can cause the issue,, then i will get it.. but sincee i ran memtest and it came out fine tat y im kinda in the no no for the ram.. but do let me know wat u think..

Thanks ^_^