Re: BIOS Print issues... - Republic of Gamers Forum - 103347

I seem to have trouble using BIOS Print on my gene z. I have flashed the bios three times. Bios version 0902. My thumb drive is detected, but not listed when I press f12.

939 Views

14 REPLIES 14

Which USB port are you using, ensure it is not the USB3 port.

To help us help you - please provide as much information about your system and the problem as possible.

Its a USB 2 port on the motherboard IO

What format is your USB drive?

Did you try FAT32

To help us help you - please provide as much information about your system and the problem as possible.

Tried fat and ntfs, does bios print require fat32?

I think it does. At least that is what I have always used.

To help us help you - please provide as much information about your system and the problem as possible.

Tried FAT32, still wasn't listed, FTR, drive is detected in BIOS...I want to see if I can somehow get the BIOS from the support disk, yet I get 'Image Outdated.' Can I still put the older BIOS on.

That is weird - you seem to have done it all correctly.

Can you switch to your B bios and see if you are now able to save screens to USB

To help us help you - please provide as much information about your system and the problem as possible.

How do I do that? Can't find it in the manual

my error I am so used to the extreme board, the Genie-z does not have two BIOS.

To help us help you - please provide as much information about your system and the problem as possible.