Other Motherboards
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

Weird VCore levels with 4.5 GHz overclock...

Hey, all. I followed the directions on the Rampage IV Extreme Easy Overclocking Guide, and I've managed to get my i7-3970X to a target turbo level of 4.5 GHz; I passed ten hours of Prime95 with a maximum temperature of 78 degrees. However, there ar...

Trim Question

So I've got some conflicting answers from my research on this and please point me in a direction if I'm missing something but on my 2 ssd's I have in raid0.... fsutil shows trim is enabled and when I got to Windows 8's defrag and optimization tool I ...

Realtek_Audio_Win7_8_VER6016971 drivers

Im having some issues with Realtek 1150, one of them is the deflating sound when powering off that has been discussed previously, but not a big deal for me, i just turn off my speakers before i turn off my pc, still shouldnt do it, but ill live with ...

Abula by Level 10
  • 2245 Views
  • 0 replies
  • 0 kudos

UEFI install windows 7 and fast boot (M6F)

So I just followed some guides and installed windows 7 with UEFI. Thing is, I'm not sure how to check if it succeeded. Also for fast boot, even with a SSD (Sandisk Extreme II), it does not appear faster than normal boot - although it still is fast, b...

hiusray by Level 7
  • 10523 Views
  • 3 replies
  • 0 kudos

Rampage IV formula unable to power on

I have a problem with my RIVF board where it will not react to pressing the power button, nothing happens at all. The solution seems to be clearing cmos/holding down the reset button and the power button afterwards. This is now the second RIVF board ...

P67 Sabertooth Sata

I'm getting horrible performance on my SATA channels, no matter which channels I use whether it's Marvell, 3 or 6 or any combination I'm only seeing 60 - 80MBs no matter which drives I put in. Yet when I hook up the same drives in RAID I see 240MBs.I...

RIVE CPU_LED No Post, Tried Everything Debug 00

Blahhhh! This is the second board I have had this problem with. First one I sent back to Amazon. Everytime I try to start, CPU_LED is on and doesn't do anything else. I've never gotten past CPU_LED and never had a debug other than 00I'm using QVL RAM...