Other Motherboards
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

[Solved] Maximus V Gene, Q Code 55!

Hello, i have a problem with MVG. - I am getting Q Code 55 (RAM not detected) in cold start, but when restart it, boot normally.My tests:* Tested with two kits of ram's (2x4gb), Kingston hyperx 1600 mhz first and now with Gskill ripjaws 1600 (always...

sebasGM by Level 7
  • 25310 Views
  • 30 replies
  • 0 kudos

23"screen Cant acces BIOS

Hi allbefore i had some issue with my videocard but now that solveds (My Videocard died )but i used a OLD 15" (1289x768) screen and i could acces my Bios without any issues.now my pc is on the Normal rig with 2x 23" screen (1980x1080) but if i go to...

error 65 during the boot

I seen the other post and it usually ends with no answer.Im currently doing a new built ,but when i boot it gives me the same error (65).i tried the reset, the bios switch ,and everything to my knowledge of reseting the ram. the LED also show an err...

IB-E True 6 core

Just read this:http://www.guru3d.com/news_story/ivy_bridge_e_hedt_core_i7_has_six_core_xeon_die.htmlhttp://www.techpowerup.com/188836/ivy-bridge-e-not-a-cut-down-8-core-20-mb-llc-die.htmlWhich leaves IB-E looking good to me....six core die

Sticky this?

Can we get this as a sticky? There is A LOT of good info here:http://rog.asus.com/254052013/maximus-motherboards/recommended-settings-for-overclocking-maximus-vi-motherboards/Thanks for all the good info Richard!

Maximus V Formula Raid0 + Trim question

Hi,I have MVF + 2x Corsair Force GT 120gb connected to intel controller in raid0. I want to check if TRIM support is enabled for me. Trimcheck.exe returns "TRIM appears to be NOT WORKING". MVF Bios version: 1803Corsair Force GT both have firmware ver...

22516 22517
czeslaw by Level 7
  • 8568 Views
  • 5 replies
  • 0 kudos

Uknown Code 40 on my new build. What is it?

Hello Everyone,Couple days ago finish my new build:CPU: FX8350MOBO: Crosshair V formula ZBoot Drive: SSD Samsung 250GBGame Drive: HDD WD Black 1TB Data Drives (from old pc): 500 Seagate & 250 MaxtorCooler: H100iMemory: 16GB VengeanceCase: Fractal R4P...

CrossChill - How do I set this up? How does it work?

I have a Asus IV Formula board. According to the description CrossChill works on "air or water". How do I set this up to work with air cooling? The manual is useless on this subject. Do I need to buy a kit?I have no interest in water cooling.Than...

AI Suite III won't install

Having issue installing AI suite III on my Impact.I tried from the CD, downloaded the last version... When I start the setup, click ok, then nothing... and when I reboot the rig, I have a popup error that say that the application did not start proper...

icebob by Level 7
  • 9882 Views
  • 5 replies
  • 0 kudos